EMMAR Power transmission

Section B pulleys are power transmission components mounted on shafts to transmit motion through V-belts. They are manufactured in different sizes and numbers of grooves to suit each application. MR Accesorios Industriales produces them under the EMMAR brand, with quality control and precise machining to ensure reliable operation in transmission systems.

The designation of these pulleys is read as POLEA followed by the size in millimeters and the number of grooves with the section letter. For example, POLEA 50 1B indicates a 50 mm diameter pulley with one groove for a section B belt; POLEA 70 4B has 70 mm and four grooves. The letter B corresponds to the belt section, which defines the groove dimensions.

They are used in a wide variety of industries in Argentina, such as food, textile, woodworking, metallurgical and agro-industrial. They are found in machine tools, conveyor belts, fans, pumps, compressors and transmission equipment in general. Their profile allows efficient power transmission at moderate center distances.

To correctly select a pulley, take into account the pitch diameter, number of grooves, shaft diameter and keyway type. It is essential to verify alignment between pulleys to avoid premature wear of belts and bearings. Lubrication of the shaft bearings and proper belt tensioning extend the system's service life.

EMMAR pulleys are interchangeable with those of other brands that follow the standard for section B belts, provided the pitch diameter, number of grooves and shaft diameter match. When requesting a quote, specify the full part number (for example, POLEA 60 2B) and the shaft characteristics to ensure compatibility.

To receive advice or request a quote, send the part number of the pulley you need via WhatsApp to MR Accesorios Industriales. Our technical team will help you choose the right option for your application.

The section C pulley is a power transmission component mounted on shafts to transmit motion through V-belts. It is manufactured in different sizes and numbers of grooves to suit each application. MR Accesorios Industriales produces them in Buenos Aires, Argentina, with more than 80 years of experience in the field. Choose the right pulley according to the power to be transmitted and the available space.

The designation of these pulleys is read directly: the number indicates the size in millimeters and the letter with the final number indicate the section and the number of grooves. For example, POLEA 80 1C is an 80 mm diameter pulley with one groove for a section C belt. POLEA 90 3C has 90 mm and three grooves. Thus, the suffix 1C, 2C, 3C, etc., indicates how many belts it can accommodate. This simple nomenclature allows quick identification of the part.

These pulleys are used in a wide variety of industries in Argentina: from metallurgical factories and food plants to ventilation systems, pumps, compressors and agricultural machinery. They are common in equipment where power must be transmitted with V-belts, such as mills, mixers, conveyor belts and machine tools. Their domestic manufacturing allows them to be adapted to each customer's specific needs.

To correctly select a section C pulley, take into account the pitch diameter, number of grooves, power to be transmitted and rotation speed. It is essential to verify alignment between pulleys to avoid premature wear of belts and bearings. Assembly must be carried out with the appropriate fastening elements, such as keys and set screws, ensuring a firm fit on the shaft. Lubrication does not apply to the pulley itself, but does apply to the bearings that support it.

Regarding equivalences, section C pulleys can be interchanged between different manufacturers as long as the standardized dimensions match: pitch diameter, groove width and number of grooves. It is not necessary to look for a specific brand if these dimensions are respected. MR manufactures these pulleys under its EMMAR brand, which allows them to be adapted to the customer's requirements.

If you need a section C pulley, send the full part number via WhatsApp to MR Accesorios Industriales. With the exact designation we can advise you and quote the part that best suits your equipment. More than 80 years of experience back us as manufacturers of housings, chains and pulleys.

Section A pulleys are power transmission components mounted on shafts to transmit motion through V-belts. They are manufactured in different sizes and numbers of grooves to suit each application. MR Accesorios Industriales produces them in Buenos Aires, Argentina, with more than 80 years of experience in the industry. They are used in a wide variety of industrial machines and equipment, and are selected according to the power to be transmitted, speed and available space.

The designation of these pulleys reads as POLEA followed by the size in millimeters and the number of grooves with the section. For example, POLEA 50 1A indicates a 50 mm diameter pulley with one groove for a section A belt. POLEA 60 2A has 60 mm and two grooves. POLEA 70 3A has 70 mm and three grooves. Section A corresponds to a standardized V-belt profile, and the grooves determine how many belts can be mounted in parallel.

These pulleys are used in belt drives in industries such as food, wood, textile, plastics and metalworking. In Argentina they are commonly found in fans, pumps, compressors, conveyor belts and machine tools. They are also used in irrigation equipment and in the agro-industrial sector. Their domestic manufacturing allows them to be adapted to the specific requirements of each plant.

To select a section A pulley, take into account the pitch diameter, the number of grooves, the power to be transmitted and the rotation speed. It is important to verify the alignment between pulleys and the correct belt tension to avoid premature wear. Mounting must be done with the appropriate tools, ensuring the fit on the shaft. Lubrication does not apply to the pulley itself, but does apply to the shaft bearings. Periodically check the wear of the grooves.

Section A pulleys can be interchanged with those of other brands that respect the same standardized dimensions. When requesting a quote, it is essential to provide the diameter, the number of grooves and the section to guarantee compatibility. If you need to replace an existing pulley, you can send us a photo or the engraved part number. At MR Accesorios Industriales we manufacture these pulleys and can advise you on the best option for your equipment.

To receive a quote, send the full pulley part number via WhatsApp. For example, POLEA 60 2A. If you do not have it, indicate the size, the grooves and the section. Our technical team will respond shortly with the necessary information. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting the industry.

The BS roller chain is a power transmission component used to link shafts and transmit motion between sprockets. Its roller design allows smooth, wear-resistant operation. At MR Accesorios Industriales we manufacture EMMAR roller chains under the BS / ISO 606 standard, available in single, double and triple strand versions. They are used in a wide variety of industrial applications, from agricultural machinery to conveying equipment.

The designation of BS chains is read from two numbers separated by a hyphen and the letter B. The first number indicates the chain pitch in eighths of an inch: for example, 04 corresponds to a pitch of 1/2 inch, 05 to 5/8 inch and 06 to 3/4 inch. The second number, preceded by B, indicates the number of strands: B1 for single, B2 for double, B3 for triple. Thus, an 08-B2 chain has a pitch of 1 inch and two strands. This nomenclature follows the BS / ISO 606 standard, which guarantees dimensional interchangeability.

BS roller chains are used in countless applications in Argentine industry. They are present in conveyor belts, grain elevators, agricultural machinery, bottling equipment, transmission systems in flour mills, feed plants and packaging lines. They are also found in the automotive and textile industries and in the manufacture of heavy machinery. Their versatility and strength make them an essential component for controlled movement in demanding environments.

To correctly select a BS chain, take into account the pitch, the number of strands and the roller and inner width dimensions. The BS / ISO 606 standard defines these parameters, which must match those of the sprocket. During assembly, check shaft alignment and proper tension to avoid premature wear. Periodic lubrication is essential: use the lubricant recommended according to speed and load. If the environment is corrosive or dusty, consider additional protections.

BS chains are interchangeable between different manufacturers that follow the BS / ISO 606 standard, since the critical dimensions are standardized. When replacing a chain, compare the pitch, roller diameter and inner width to ensure compatibility with the existing sprockets. At MR Accesorios Industriales we manufacture EMMAR chains under this standard, which guarantees their interoperability with components from other brands. Always verify that the designation matches the original chain.

If you need a BS roller chain for your equipment, contact us. At MR Accesorios Industriales we advise you so you can choose the correct series for your application. Send us the chain code via WhatsApp and we will quote you promptly. With more than 80 years of experience, we are your reliable partner in power transmission.

ASA roller chains EMMAR are power transmission components manufactured by EMMAR Accesorios Industriales. They are used to transmit motion between parallel shafts through sprockets, with high efficiency and durability. The ASA series covers standardized pitches and single, double and triple strand configurations, which allows adapting them to different powers and speeds. They are suitable for demanding industrial environments and are available in Buenos Aires, Argentina, with technical advice to choose the right chain for each application.

The ASA designation corresponds to the American standard for roller chains. The number that follows indicates the pitch and load capacity: the higher the number, the greater the pitch and strength. For example, ASA 40 has a 12.7 mm pitch, ASA 50 a 15.87 mm pitch and ASA 60 a 19.05 mm pitch. The suffix /2 or /3 indicates the number of strands: single, double or triple. Thus, ASA 40/2 is double strand with 12.7 mm pitch, and ASA 60/3 is triple strand with 19.05 mm pitch. This nomenclature allows quickly identifying the main characteristics.

These chains are used in a wide variety of industries in Argentina: food, cement, mining, wood, textile, packaging and logistics. They are found in conveyors, elevators, machine tool drives, mixers and agricultural equipment. Their versatility and strength make them suitable both for low-speed, high-load transmissions and for medium-speed applications. MR Accesorios Industriales manufactures them locally, which provides technical support for replacement and new projects.

To select an ASA chain, take into account the power to be transmitted, the speed, the center distance and the environmental conditions. It is essential to verify the pitch and the number of strands according to the existing sprocket. During assembly, ensure precise alignment of the sprockets and adequate tension to avoid premature wear. Lubrication must be the one indicated according to speed and load; in dirty or humid environments, consider specific protections or lubricants. Careful assembly extends the service life of the transmission.

ASA EMMAR chains are interchangeable with those of other brands that follow the same standard, such as series 40, 50, 60, etc. When replacing, verify that pitch, roller diameter and inner width match. If you need a chain for imported equipment, we can help you identify the equivalence. MR's in-house manufacturing provides supply continuity and adaptation to special requirements, such as custom lengths or multiple configurations.

To request a quote for your ASA chain, send the complete part number via WhatsApp: for example, ASA 40/2 or ASA 60/3. If you do not have it at hand, send us the pitch, roller diameter and inner width measurements, and we will advise you. At MR Accesorios Industriales we combine experience and domestic manufacturing to give you a reliable solution. Write to us and we will reply shortly.

EMMAR BS series roller chains are power transmission components used to link shafts and transmit motion between sprockets. They are manufactured under BS / ISO 606 standard, which guarantees their interchangeability with other equivalent systems. MR Accesorios Industriales produces them in its workshops and sells them in Buenos Aires, Argentina, to supply local industry with a reliable, domestically manufactured product.

The designation of these chains is read from a number indicating the pitch and a suffix defining the number of strands. For example, 08-C1 corresponds to a chain with pitch 08 and single strand, while 08-C2 is the double-strand version. The same applies to 10-C1, 10-C2, 12-C1, 12-C2 and 16-C1: the number identifies the size according to BS / ISO 606, and the suffix C1 or C2 indicates whether it is single or double. This nomenclature allows you to quickly select the right chain for each application.

In Argentine industry, EMMAR roller chains are used in a wide variety of equipment: conveyors, elevators, agricultural machinery, packaging lines, mixers, mills and transmission systems in manufacturing plants. Their robust construction makes them suitable for environments with dust, humidity or variable loads. As an in-house MR manufacturing product, they can be adapted to specific length and configuration requirements, always within BS / ISO 606 standard.

To correctly select a chain, take into account the pitch, the number of strands, the roller diameter and the inner width. In the examples, the 8.51 mm roller and 7.75 mm inner width correspond to the 08 series; the 10.16 mm roller and 9.65 mm width correspond to the 10 series. These values define compatibility with sprockets. In addition, it is essential to verify shaft alignment, proper lubrication and correct tensioning to maximize service life. Sealing and cleanliness of the environment also influence performance.

EMMAR BS series chains comply with BS / ISO 606 standard, which facilitates their interchangeability with chains from other manufacturers that follow the same standard. When replacing a chain, always compare the pitch, the number of strands and the roller and inner width dimensions. Although equivalences exist between brands, each manufacturer may have minor variations in heat treatment or materials. Therefore, it is advisable to consult with us to validate compatibility before purchase.

If you need to request a quote for EMMAR roller chains or resolve technical questions, write to us via WhatsApp. MR Accesorios Industriales responds with the information you need to choose the right product. Send us the chain code, the number of strands and any additional data about your application; our technical team will advise you with no obligation.