Industrial pulley 90 mm, 2 grooves, section C

EMMAR POLEA 90 2C is a pulleys reference, within Power transmission. Request a quote for POLEA 90 2C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 90 2C pulley is a V-belt drive pulley, manufactured by EMMAR Accesorios Industriales. It has a 90 mm diameter, 2 grooves and section C, which makes it suitable for transmitting power in equipment that runs with belts of that section. It is used in agricultural machinery, compressors, fans and transmission systems in general. Because it is in-house manufactured, you can inquire about variants of diameter, number of grooves and finish for your application.

This POLEA 90 2C pulley has a 90 mm diameter, 2 grooves and section C. Section C corresponds to V-belts with a wide profile, and the two grooves allow drives to be set up with two belts in parallel. The 90 mm diameter defines the transmission ratio together with the driven pulley. It is a cast part, machined so that the grooves seat the belt at the correct angle and with the balance needed to rotate without vibration.

It is used in drives where equipment such as screw compressors, industrial fans, centrifugal pumps, conveyor belts and agricultural machinery must be moved. It also appears in machine tools and in process equipment that runs with section C belts. Because it has two grooves, it is common in applications where the aim is to distribute the load between two belts or keep a backup in case one breaks.

To mount it, verify that the shaft has the correct diameter and key, and that the pulley fits with a fit that does not allow play. Align the pulleys with a straightedge or a laser so that the belts work without uneven wear. Tension is adjusted according to the equipment manual: too little makes it slip, too much punishes the bearings. If you replace a pulley, compare diameter, grooves and section before ordering it.

If you need an equivalent pulley or a nearby size, send us the part number POLEA 90 2C or the data of the original pulley: diameter, number of grooves and section. We can also manufacture a pulley with the dimensions you need, since it is an in-house manufactured product. With that data we'll quote the part that best suits your machine.

To get a quote, send the part number POLEA 90 2C by WhatsApp to MR Accesorios Industriales. If you have doubts about the section or the number of grooves, write to us and we'll help you identify it.