Our models
The products most often quoted at MR, with the brands we sell and those we manufacture in Buenos Aires, Argentina.
SKF SNL 516-613 housing, part by part
Two bolts hold the cap
They come loose and the cap lifts off in one piece, while the base stays on the machine.
SKF SNL 516-613 split housing
Cast body split into cap and base, with the bearing seat machined in both halves.
22216 EK spherical roller bearing
Two rows of barrel-shaped rollers and a tapered bore: it accommodates shaft misalignment without losing load capacity.
BGL H 316 adapter sleeve
The lock nut and lock washer drive the bearing up the sleeve taper and clamp it to a 70 mm shaft.
And it closes again
Sleeve, bearing, cap and bolts: we quote the complete set or each part.
Scroll to open it ↓
Animation built from SKF and BGL CAD models.
SKF 6205-2RSH deep groove ball bearing
Sealed on both sides
A rubber seal on each side keeps the grease in and dust and water out.
SKF 6205-2RSH deep groove ball bearing
A single row of balls between two steel rings: it takes radial loads and moderate axial loads in both directions at high speeds.
25 × 52 × 15 mm
25 mm bore, 52 mm outside diameter and 15 mm width: standard 62 series dimensions.
Greased at the factory
Ready to fit in electric motors, pumps, fans and gearboxes.
Main models

SNL split housings
SKF and EMMAR's own manufacturing, for self-aligning bearings on adapter sleeves.
See models →
Spherical roller bearings
SKF, FAG, NSK, NTN and Timken, with cylindrical or tapered bore.
See models →






Brands we sell
Which model do you need?
Send us the part number or the size and we will quote it.





















































