SNH Split Plummer Block Housings
40 references. Each one has its manufacturer part number.
Search for your part number in SNH Split Plummer Block Housings
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.

Most searched part numbers
The ones searched most on Google. Each one opens its datasheet, with dimensions and a WhatsApp quote.
The SNH split plummer block housing is a cast-iron housing split into two halves: the base and cap are joined with bolts, so the bearing mounts and dismounts without disassembling the shaft or moving the machine. Selection depends on shaft diameter, the bearing it will accommodate, and the attachment method to the frame.
In SKF part numbers like SNH 507-606, SNH 508-607 or SNH 509, the SNH designation identifies the series and the number corresponds to the size of the housing, not the shaft diameter. In codes with two numbers, such as 507-606, both indicate bearing sizes that share the same outside diameter and fit in that housing. Suffixes, as in SNH 218 TSN/H6 or SNH 507-606/VZ2P3, define variants: two housings with the same base number may differ, so the complete part number is what defines the piece.
These housings are used on transmission shafts in continuous-process equipment: conveyor belts, elevators, mills, mixers, pumps, and fans. The advantage of split construction is maintenance: remove the cap, replace the bearing, and close again without uncoupling the shaft or realigning the entire drive. They are completed with closing caps and retaining rings according to the sealing and axial positioning required by the assembly.
We sell SKF in this category. To request a quote, send via WhatsApp the complete part number or, with the housing in view, the number engraved on the casting; if you don't have it, provide the shaft diameter, the bearing, and the distance between anchor holes. We'll quote promptly.
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
SNH Split Plummer Block Housings by part number
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
- Request a quote
Send us the part number and we'll quote you
Photo of the part, part number written on a piece of paper, drawing or spreadsheet: whatever you have at hand.
Request your quote via WhatsApp or email, with the quantity you need.

