SNH split plummer block housing SKF SNH 222 TSN/H6

SKF SNH 222 TSN/H6 is a sNH split plummer block housing reference, within Bearing housings. Request a quote for SNH 222 TSN/H6 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF SNH split plummer block housing is a housing split into two halves that accommodates bearings with a tapered or cylindrical adapter. It is used to mount shafts in machine structures, allowing bearing replacement without disassembling the shaft. Its design facilitates installation and maintenance in equipment where access is limited. MR Accesorios Industriales carries this line with the technical backing of more than 80 years in the field.

The designation SNH identifies the series of medium-section split plummer block housings. The number that follows indicates the size: for example, SNH 218 corresponds to a housing for a bearing with a 90 mm bore, while SNH 222 is for 100 mm. The suffix TSN/H6 refers to the seal kit supplied with the housing, consisting of lip seals and flinger rings. It is important to verify that the seal kit is suitable for the working environment, since protection against dust and moisture depends on it.

These housings are used in a wide variety of industrial applications: conveyors, mills, mixers, pumps, fans and process equipment. In Argentina, they are common in the food, cement and mining industries and in aggregate processing plants. Their ability to withstand moderate radial and axial loads makes them suitable for transmission shafts and rollers. The split version allows replacing the bearing without disassembling other equipment components, which reduces downtime.

To correctly select an SNH housing, the shaft diameter, the bearing type (with tapered or cylindrical adapter), the load and the environmental conditions must be considered. The TSN/H6 seal is suitable for environments with moderate dust and moisture; for more severe conditions, other types of seals may be required. During mounting, it is essential to align the two halves of the housing and ensure uniform tightening of the bolts. Bearing lubrication must be performed according to the manufacturer's recommendations, and it is important to verify the internal clearance after mounting.

SKF SNH housings are interchangeable with those of other brands that follow the same dimension standard. When looking for a replacement, it is necessary to compare not only the shaft diameter but also the center height, the distance between holes and the seal type. MR Accesorios Industriales carries the SKF brand as part of its product line, and can advise you on the equivalence with other references. Do not invent part numbers: if you have doubts, consult us with the complete designation.

If you need an SNH split plummer block housing, write to us via WhatsApp and send us the complete part number (for example, SNH 218 TSN/H6). At MR Accesorios Industriales we help you identify the right part and resolve any technical question. With more than 80 years of experience, we are here to advise you on selection and installation.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.