Roller chain EMMAR 06-B3

EMMAR 06-B3 is a roller chain reference, within Power transmission. Request a quote for 06-B3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 06-B3 chain is a European standard BS roller chain, with 3/8" pitch and single strand, used to transmit motion between parallel shafts in low-power machines. Its 6.35 mm roller and 5.72 mm inner width make it compatible with sprockets of the same standard. It is a lightweight chain, designed for moderate speeds and low loads, very common in small equipment.

This item is a roller chain from the BS series, identified as 06-B3. According to the product page data, it has a roller diameter of 6.35 mm and an inner width of 5.72 mm. The designation 06-B3 corresponds to a chain with 3/8" pitch and single strand, manufactured under European standard. It is sold by the meter or as an assembled section, depending on what you need. If your machine uses this size, this is the chain that fits.

It is used in low-power drives: light conveyors, packaging machines, bakery equipment, agitators, automatic doors, and manual or small motorized drive mechanisms. It also appears in the food industry and in workshops that assemble compact equipment. Where there are two parallel shafts with a short center distance and a constant transmission ratio is needed, this chain fits the application.

To install it, verify that the sprockets are BS standard and have the same pitch. The 06-B3 chain is not interchangeable with ANSI standard chains, even if the pitch is similar. Check shaft alignment and tension: it should have a slight sag. Lubricate with compatible oil or grease and monitor roller and sprocket wear. If the chain jumps or makes noise, it may be stretched or misaligned.

If you cannot find the exact size or need an equivalent chain, send us the 06-B3 code or the measurements of your sample: pitch, roller diameter, and inner width. We can also offer you a neighboring size within the same BS series if the 06-B3 does not fit your application. With that data we verify compatibility with your sprocket and provide the alternative that best suits you.

To request a quote for this chain or ask about another size, write to us on WhatsApp and mention the 06-B3 code. At MR Accesorios Industriales we work with power transmission and can advise you so you choose the right chain for your equipment. Send us a photo of the old chain or the measurements and we will reply with the applicable option.