Roller chain EMMAR 06-B1

EMMAR 06-B1 is a roller chain reference, within Power transmission. Request a quote for 06-B1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 06-B1 chain is a European-standard BS roller chain with a 3/8 inch pitch, used to transmit motion between parallel shafts in low-power equipment. Its 6.35 mm diameter roller and 5.72 mm inner width make it compatible with sprockets of the same standard. It is a common choice in compact mechanisms where a simple, quiet, low-maintenance drive is sought, provided the loads and speeds indicated by the manufacturer are respected.

This item is a single-strand roller chain from the 06-B1 series, manufactured according to European BS standard. Its main attributes are a roller diameter of 6.35 mm and an inner width of 5.72 mm. The 3/8 inch pitch corresponds to the 06-B1 designation, which places it as a light-duty chain within the BS range. It is supplied as bulk chain or in assembled sections, depending on the equipment's needs, and requires sprockets compatible with the same standard and pitch for correct meshing.

Typical applications of the 06-B1 chain include low-power drives in machine tools, packaging equipment, light conveyors, automatic doors and drive mechanisms in general. It is also found in the food industry and on assembly lines where a chain with reduced dimensions is needed. It is suitable for short center distances and moderate drive ratios, provided the manufacturer's load and speed conditions are verified.

To install an 06-B1 chain, check that the sprockets are BS standard and of the same pitch, that they are aligned and that the tension is correct: not so loose that it jumps nor so tight that it overloads the bearings. Lubricate with oil or grease compatible with the work environment and check wear periodically. If the chain operates in the presence of dust, moisture or extreme temperatures, choose the appropriate lubricant and consider protections.

If you need an equivalent chain or a close size, the most practical option is to send us code 06-B1 or the full designation shown on the equipment nameplate. You can also indicate the pitch, the number of links and the type of joint required. With that data, at MR Accesorios Industriales we help you identify the compatible chain and confirm alternative sizes within the BS standard.

To request a quote for the 06-B1 chain or ask about other sizes in the BS series, write to us via WhatsApp and send us the code. At MR Accesorios Industriales we work with power transmission and can advise you on the right chain for your application. Send us the code and we will reply with the technical information you need to proceed with your order.