Industrial pulley 80 mm, 1 groove, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
EMMAR POLEA 80 1C is a reference of pulleys, within Power transmission. Request a quote for POLEA 80 1C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The POLEA 80 1C pulley is a power transmission pulley of in-house manufacturing, EMMAR brand, with 80 mm diameter and one groove for a section C belt. It is used to build belt drives in industrial equipment, where a simple transmission ratio and a compact mounting are needed. Because it is produced in-house, MR controls the machining of the groove and the balancing, which gives a repeatable pulley for replacements and short runs.
This item is a pulley of 80 mm diameter, with 1 groove and section C. The POLEA 80 1C designation summarizes those three variables: size, number of grooves and belt section. Section C corresponds to a belt profile with greater height than sections A and B, so the pulley has a deeper groove and a matching outside diameter. It is an in-house manufactured part, EMMAR brand, intended for drives where the section C belt works with medium loads.
It is used in drives of machine tools, compressors, fans, centrifugal pumps and conveying equipment. It also appears in the replacement of original pulleys when a 80 mm pulley with a single section C groove needs to be replaced. In those cases it is advisable to verify the pitch diameter and the type of bushing or bore, because the pulley is mounted on the shaft of the motor or the driven equipment and must match the keyway and the fastening system.
To select the pulley, start from the belt you already have: if it is section C, the groove of this pulley is compatible. Then verify the shaft diameter, the type of fastening (taper bushing, bore with keyway or press fit) and the center distance of the drive. During mounting, align the pulleys with a straightedge or an alignment laser, tension the belt according to the equipment manual and check that the groove has no burrs. A misaligned pulley wears the belt and generates vibration.
If you need an equivalent or a pulley with more grooves, send us the part number POLEA 80 1C or the designation of the original pulley by WhatsApp. With that data we propose the corresponding in-house manufactured pulley or we make it to measure. We can also advise you on the compatible section C belt and on the shaft fastening system. The quote is made by WhatsApp and is answered with the available technical information.
MR Accesorios Industriales manufactures this pulley and other power transmission parts. If your equipment uses a 80 mm pulley with one section C groove, this item is the starting point. Write to us by WhatsApp with the part number and we help you confirm the correct variant for your application.
Dimensions
- Size
- 80mm
- Grooves
- 1
- Section
- C
Frequently Asked Questions
- What belt does the POLEA 80 1C pulley use?
- It uses a section C belt, which is a taller profile than sections A and B. To confirm the length, you need the center distance and the diameter of the driven pulley. Send us that data by WhatsApp and we will advise you.
- How do I know if this pulley replaces the one on my equipment?
- Compare the diameter, the number of grooves and the belt section. Also the shaft diameter and the type of fastening. If they match, it is a candidate. If not, send us the original designation and we look for an equivalent.
- Does the pulley come with a bushing or a finished bore?
- The POLEA 80 1C designation defines diameter, grooves and section. The type of bore or bushing is confirmed against the manufacturer's data sheet when quoting. Indicate the shaft diameter and the fastening system of your equipment so we can give you the correct variant.