Roller chain EMMAR 10-C2

EMMAR 10-C2 is a roller chain reference, within Power transmission. Request a quote for 10-C2 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 10-C2 chain is a double-strand roller chain according to European standard BS, with 5/8" (15.875 mm) pitch. It is used to transmit motion between parallel shafts when more load capacity is required than a single-strand chain of the same series. It is a wear part: it is replaced together with the sprockets when elongation exceeds the allowable limit. MR Accesorios Industriales markets it under part number 10-C2 and provides quotes via WhatsApp.

The designation 10-C2 corresponds to a roller chain from series 10 according to European standard BS, in a two-strand version. The number 10 defines the pitch: 5/8" (15.875 mm). The suffix C2 indicates double strand. The data sheet for this item lists a 10.16 mm roller diameter and 9.65 mm inner width. Series 10 has a medium pitch within the BS line and is supplied with a wide variety of sprockets and accessories.

It is used in moderate-speed chain drives: conveyors, mixers, mills, woodworking machines, packaging equipment and production lines in general. The double strand allows handling more power than a single-strand chain of the same pitch, or working with a higher safety factor on the same shaft. It is also used to replace single-strand chains when the redesign does not allow changing sprocket diameters.

To select a 10-C2 chain, take into account the power to be transmitted, the speed of the high-speed shaft, the number of sprocket teeth and the center distance. Lubrication and shaft alignment are critical to service life. Check that the sprockets are for double strand and that the pitch matches: a BS chain is not interchangeable with an ANSI chain of the same nominal number. Elongation is checked by measuring over several pitches.

If you need a similar size or an equivalent, send us the complete code, the number of strands, the pitch and a photo or sample of the old chain. With that information we can offer the alternative that best suits your equipment. We can also quote the chain with the corresponding sprockets if you are assembling a complete drive. Write to us via WhatsApp and we will reply with the quote.

MR Accesorios Industriales has more than 80 years in the industry and markets chains, sprockets, bearings and power transmission products. If your equipment uses the 10-C2, send us the code and the quantity to request a quote. We answer technical inquiries and equivalence requests via WhatsApp.