SKF FY 20 TF/VA201 y-bearing unit

SKF FY 20 TF/VA201 is a reference of y-bearing unit, within Bearing housings. Request a quote for FY 20 TF/VA201 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF FY … TF/VA Y-bearing housing with insert bearing is an assembled unit that combines a split housing unit with an insert bearing. It is used to mount rotating shafts in machine structures, allowing the bearing to be aligned and secured easily. Its robust design and the availability of variants for demanding conditions make it suitable for industrial equipment operating with moderate loads and normal speeds.

The designation FY … TF/VA is read as follows: FY identifies the Y-bearing housing category; the number that follows indicates the nominal shaft diameter, in inches or millimeters depending on the case (for example, FY 1.1/2 for 1 1/2 inches, FY 25 for 25 mm). The suffix TF indicates the type of locking of the insert to the shaft, generally by means of set screws. The VA block with a number defines special variants, such as heat treatments or high-temperature lubricants. Thus, FY 1.1/4 TF/VA201 is a housing for a 1 1/4" shaft with TF locking and VA201 variant.

These housings are used in a wide range of industries in Argentina: food plants, material handling, industrial ventilation, bottling equipment, conveyor belts and agricultural machinery. Their split design makes mounting and dismounting easy without removing the shaft, which simplifies maintenance on production lines. They are also common in applications where the shaft must be supported at intermediate points, such as long drive shafts or process machine rollers.

To select correctly, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The VA variant suggests suitability for elevated temperatures, so it is advisable to verify the operating range. During mounting, ensure proper alignment between housings to avoid parasitic stresses. Lubrication must be the one indicated for the variant; at high temperatures, use specific greases. The insert seal protects against contaminants; if the environment is dusty or humid, consider additional seals.

As for equivalents, SKF Y-bearing housings with insert bearing can be interchanged with those of other brands that follow the same dimensional standard. However, not all suffixes match: the VA variants are specific to SKF. To replace an existing housing, the safest approach is to compare the critical dimensions (shaft diameter, hole spacing, height to center) and the locking type. If you have doubts, ask us with the full part number and we will advise you.

To request a quote for these SKF FY TF/VA housings, write to us on WhatsApp. At MR Accesorios Industriales we help you identify the exact reference for your application. Send us the part number stamped on the housing or the shaft dimensions and we will reply shortly.