Industrial pulley 600 mm, 2 grooves, section B

EMMAR POLEA 600 2B is a pulleys reference, within Power transmission. Request a quote for POLEA 600 2B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 600 2B pulley is a V-belt drive pulley, manufactured by EMMAR Accesorios Industriales. It has a 600 mm diameter and two grooves for section B belts, which allows power to be transmitted between parallel shafts with a defined transmission ratio. It is used in equipment where fans, pumps, compressors or conveyors need to be driven with a profile B belt. Because it is in-house manufactured, variants of diameter, number of grooves and finish can be requested according to the equipment's needs.

This item is a pulley with a 600 mm diameter, 2 grooves and section B. The designation POLEA 600 2B summarizes those three data points: the 600 mm outside diameter, the two grooves where the belts seat and profile B, which corresponds to section B V-belts. The pulley is mounted on the equipment shaft and transmits motion through the belts. Having two grooves allows the transmission capacity to be doubled compared with a single-groove pulley, while keeping the same diameter.

Typical applications for a 600 mm pulley with two section B grooves are in medium- and high-power equipment: industrial fans, centrifugal pumps, screw compressors, belt conveyors and continuous process machines. In these cases a stable transmission ratio is sought, along with the possibility of mounting two belts to distribute the load. It is also used in equipment where a certain inertia is needed, such as mills or mixers, because the large diameter helps maintain the rotation rate.

To mount and select this pulley, take into account the shaft diameter, the type of keyway and the fastening system. Check that the pulley is aligned with the driving pulley, because misalignment accelerates wear on the belts and the grooves. Belt tension is adjusted according to the equipment manual or the belt manufacturer's recommendations. If the equipment works with variable loads, it is advisable to periodically check the condition of the grooves and wear on the keyway.

If you need an equivalent pulley or a nearby size, send us the part number POLEA 600 2B or the diameter, number of grooves and section you are looking for. We can also evaluate variants of diameter, number of grooves or bushing type if the equipment requires it. Because it is in-house manufacturing, EMMAR brand, we have flexibility to adapt the pulley to your application. The more data you give us — shaft diameter, keyway, distance between grooves — the more accurate the quote will be.

To request a quote for this pulley or ask about a similar one, write to us on WhatsApp and send us the part number POLEA 600 2B. We will reply with the technical information and the corresponding quote. If you have doubts about the equivalence with another pulley, send us a photo or the data of the original pulley and we will help you identify it. At MR Accesorios Industriales we have been working with power transmission for more than 80 years, and we can advise you so that you choose the correct pulley for your equipment.