Industrial pulley 600 mm, 3 grooves, section B

EMMAR POLEA 600 3B is a pulleys reference, within Power transmission. Request a quote for POLEA 600 3B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 600 3B pulley is a power transmission pulley of in-house manufacturing, EMMAR Accesorios Industriales brand, with 600 mm diameter, 3 grooves and section B. It is used to transmit motion between shafts by means of V-belts, in equipment that requires several simultaneous transmission lines. Its construction is designed to withstand the loads typical of continuous operation in industrial plants, workshops and drive systems where the reliability of the belt-pulley link is decisive for the process.

This item is a pulley of 600 mm diameter, with 3 grooves and section B, according to the designation POLEA 600 3B. Section B corresponds to a classic V-belt profile, and the three grooves allow mounting three belts in parallel on the same body. The 600 mm diameter defines the transmission ratio when combined with another pulley in the system. It is an in-house manufactured part, EMMAR brand, designed to be integrated into belt drives where speed needs to be multiplied or reduced between shafts.

Typical applications include industrial fans, compressors, centrifugal pumps, conveyor belts, mixers and process equipment that run with V-belt transmission. It is also used in machine tools, mills and low and medium power drive systems where the aim is to distribute the load among several grooves to reduce the stress on each belt. In all cases, the pulley works together with a shaft and a fastening system that must be selected according to the machine.

For assembly, verify that the shaft diameter and the type of fastening (keyway, taper bushing or set screw) match those of the pulley. The alignment between driving and driven pulleys must be careful: angular or parallel misalignment accelerates belt wear and generates vibrations. Belt tension is adjusted according to the equipment manual or the belt manufacturer's recommendations. In multi-groove drives, all belts must be from the same batch and replaced together to avoid length differences that overload a single line.

If you need a pulley with a different number of grooves, another diameter or a different section, we can manufacture it or find an equivalent. For that, send us the current part number, the full designation or the shaft and outer diameter measurements. We can also quote a neighboring size if the one you have is not available. The more data you give us (diameter, grooves, section, type of fastening), the faster we can confirm the right alternative for your equipment.

To request a quote for this pulley or ask about a variant, write to us on WhatsApp with the part number POLEA 600 3B or with the measurements you need. At MR Accesorios Industriales we manufacture pulleys and other transmission components, and we can advise you so that the part adapts to your drive. Send your inquiry and we will reply with the technical information and the corresponding quote.