Industrial pulley 600 mm, 2 grooves, section A

EMMAR POLEA 600 2A is a pulleys reference, within Power transmission. Request a quote for POLEA 600 2A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 600 2A pulley is a V-belt drive pulley manufactured by EMMAR Accesorios Industriales. It has a 600 mm diameter, 2 grooves and section A, which makes it suitable for driving equipment that needs moderate torque with a single belt per groove. It is used in fans, compressors, pumps and conveyors, where a stable transmission ratio and simple replacement are sought. Being in-house manufactured, you can inquire about variants of diameter and number of grooves within the same section.

This pulley has a 600 mm diameter, 2 grooves and section A. Section A corresponds to classic narrow-profile V-belts, and the two grooves allow two belts to be mounted in parallel on the same hub. The 600 mm diameter defines the peripheral speed: the larger the diameter, the lower the rotation speed for the same belt speed. The part number POLEA 600 2A unambiguously identifies the combination of diameter, grooves and section, and it is the data you should provide when ordering an equivalent or a nearby size.

Typical applications for a pulley of this size and section are slow-turning equipment with sustained torque demand: centrifugal fans, screw compressors, process centrifugal pumps, belt conveyors and mixers. It is also used as a driven pulley in belt reducers, where the goal is to lower the motor revolutions without resorting to a mechanical reducer. In all cases, the pulley works together with a shaft, a hub and a fastening system that must be defined according to the machine.

To select and mount this pulley, take into account the pitch diameter, the number of grooves and the belt section, which must match the driving pulley. Verify the alignment between pulleys: angular or parallel misalignment accelerates wear on the belt and the grooves. The hub and the shaft fastening system —key, taper bushing or set screw— are chosen according to the torque and the shaft diameter. If the equipment runs with vibration, it is advisable to check static balancing before start-up.

If you need an equivalent pulley or a nearby size, provide the part number POLEA 600 2A or the data of the original pulley: diameter, number of grooves and section. With that, a variant of the same section A with another diameter or a different number of grooves can be evaluated, or a pulley of another section if the belt changes. Custom pulleys can also be manufactured within the in-house manufacturing line, EMMAR brand, as long as diameter, grooves, section and hub type are defined.

To quote this pulley or inquire about a similar size, send the part number POLEA 600 2A by WhatsApp to MR Accesorios Industriales. If you have doubts about the section or the number of grooves, attach a photo of the original pulley and the shaft measurements. This way the correct variant can be confirmed and mounting errors avoided.