Industrial pulley 600 mm, 1 groove, section C

EMMAR POLEA 600 1C is a reference of pulleys, within Power transmission. Request a quote for POLEA 600 1C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 600 1C pulley is a V-belt drive pulley, manufactured by EMMAR Accesorios Industriales. It has a 600 mm diameter, a single groove and section C, which places it among the largest pulleys for medium and high power lines. It is used to drive shafts of mills, pumps, fans and conveyors where it is necessary to reduce speed and transmit torque with a single section C belt.

This item is identified with the designation POLEA 600 1C: 600 mm outside diameter, 1 groove and section C. It is an in-house manufactured pulley, EMMAR brand, designed for section C V-belts, which are the ones chosen when the torque to be transmitted exceeds what a section B handles. The single groove simplifies alignment and tensioning, and the large diameter allows working with low transmission ratios without resorting to multiple grooves.

Typical applications appear in plants where speed must be reduced and load sustained: mills, mixers, high-flow centrifugal pumps, industrial fans, conveyor belts and compressors. It is also used as an output pulley on gear reducers and in agricultural or earthmoving machinery. In all cases it is advisable to verify that the belt is section C and that the small pulley diameter is not below the minimum recommended for that section.

For mounting, check the shaft diameter and the type of fixing before ordering the pulley: there are versions with keyway, with taper bushing or with set screw, and they are not interchangeable. Check the alignment between pulleys with a ruler or laser, because a misalignment of a few millimeters shortens belt life and punishes the shaft bearings. Tension is adjusted according to the belt manufacturer's manual, not by eye. If the pulley is going to work under heavy load, also verify the pitch diameter and the admissible peripheral speed.

To quote the part number POLEA 600 1C and the machine data: shaft diameter, belt section, number of grooves and type of fixing, send us. With that we will indicate the pulley from our line that replaces the original or we manufacture it to measure. We can also quote a pulley of another diameter within the same section C if space allows.

MR Accesorios Industriales manufactures split plummer block housings, ANSI chains and pulleys, and distributes bearings, power transmission, seals, bushings, mounting tools and lubricants. To request a quote for this pulley or ask about a different size, write to us on WhatsApp with the product part number and the equipment data. We will reply with the alternative that best suits your application.