Y-bearing unit SKF UCFCX 08D1

SKF UCFCX 08D1 is a y-bearing unit reference, within Bearing housings. Request a quote for UCFCX 08D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing housing with insert bearing is a mounting unit that combines a housing and an insert bearing, ready to install. It is used to guide rotating shafts in equipment where a compact solution with easy alignment is required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice so you can choose the right configuration for your application.

The designation UCFCX identifies a square four-bolt flange housing with insert bearing. The number that follows, as in UCFCX 08D1, indicates the shaft diameter in inches (08 = 1/2 inch). The suffix D1 indicates a construction variant, usually linked to the type of sealing or the configuration of the insert. To confirm the exact interpretation of each part number, it is advisable to consult with our technical team.

These housings are used in conveyors, belts, elevators, mixers, fans and agricultural machinery. In Argentina, they are common in food plants, cement plants, tanneries and agro-industrial facilities. Their flange design facilitates mounting on metal structures and allows aligning the shaft with moderate tolerances, which simplifies maintenance in equipment operating in dusty or humid environments.

To select the housing, verify the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The sealing of the insert must protect against contaminants; in humid environments or with frequent washing, additional protection is recommended. Mounting requires a flat, clean surface, and adequate lubrication according to the duty cycle. Correct alignment avoids unnecessary stresses and prolongs the service life of the bearing.

Y-bearing housings with insert bearing are interchangeable between different brands if the main dimensions match: shaft diameter, distance between holes and housing height. When requesting a quote, it is essential to provide the complete part number engraved on the part or on the plate. If you do not have it at hand, we can help you identify it from a photo or measurements taken with a caliper.

To receive a quote, send the complete part number of the housing by WhatsApp to MR Accesorios Industriales. If you have doubts about the designation or need an alternative, our technical team can advise you. We can also evaluate special applications and suggest the most suitable sealing or lubrication for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.