SKF UCFC 210/H y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF UCFC 210/H is a reference of y-bearing unit, within Bearing housings. Request a quote for UCFC 210/H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The UCFC housing with SKF insert bearing is an assembled unit that combines a cast iron housing with a circular flange and an insert bearing with an extended inner ring. It is used to support rotating shafts in equipment where mounting is done on a flat face with four bolts. MR Accesorios Industriales sells this line, with technical advice to choose the right size for your application.
The UCFC designation is read in parts: U indicates a housing unit with insert bearing, C corresponds to the circular flanged housing and F to the bolt mounting type. The number that follows, as in UCFC 210/H, indicates the insert size and shaft diameter. The /H suffix identifies a housing variant, generally associated with the material or surface treatment. Knowing this logic lets you order the exact replacement without ambiguity.
These housings are seen in belt conveyors, mixers, fans, packaging lines and processing lines in food, chemical and aggregate plants. In Argentina they are common in agriculture and manufacturing, where the circular flange makes mounting on existing sheet metal or structure easier. Their design allows shaft alignment with moderate tolerances and absorbs small misalignments typical of equipment with vibration.
To select correctly, take into account the shaft diameter, the type of load and the environmental conditions. The insert's sealing defines whether it withstands dust, water or frequent washdowns. Lubrication can be permanent or require periodic greasing depending on the insert. During mounting, tighten the flange bolts evenly and check that the shaft turns freely before start-up. Correct alignment extends bearing life.
Regarding equivalences, circular flanged housings from different brands often share standardized dimensions, but always verify the complete part number and housing dimensions before interchanging. The same number can vary in the insert's locking system or sealing. If you have doubts, send us the number engraved on the part and the main dimensions.
MR Accesorios Industriales sells the SKF brand as part of its housing line. If you need a quote for a UCFC 210/H or any other size, write to us on WhatsApp with the part number and quantity. We'll reply with the corresponding reference and the technical data you need.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the /H suffix mean on a UCFC housing?
- The /H suffix indicates a construction variant of the housing, which may be related to the material or surface finish. It does not change the main mounting dimensions, but it does affect details such as corrosion resistance. Ask us about the complete part number to confirm the version.
- How do I choose the correct shaft diameter for my application?
- The shaft diameter comes from the number in the designation, as in UCFC 210/H. Measure the shaft with a caliper and compare with the manufacturer's table. If the shaft is worn, consider an insert with an eccentric locking collar or set screws depending on the load.
- Is this housing suitable for very humid environments?
- It depends on the insert's sealing. For humidity or frequent washdowns, choose versions with greater protection seals. The cast iron housing can be painted or coated. Tell us your equipment's conditions and we'll guide you on the right variant.