SKF H 913842/810/QCL7C tapered roller bearing

SKF H 913842/810/QCL7C is a reference of tapered roller bearing, within Bearings. Request a quote for H 913842/810/QCL7C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF tapered roller bearings are rolling elements that support combined radial and axial loads, with a geometry that distributes the load progressively over the raceway. They are used in assemblies where a shaft must be guided while also absorbing thrust, such as gearbox housings, wheel hubs and transmission equipment. MR Accesorios Industriales sells and distributes this line in Buenos Aires, Argentina, with more than 80 years of activity in the industrial sector.

The designation of this series is read in two blocks separated by a slash. The first, with the letter H and the assembly number, identifies the size group; the second, with three digits, corresponds to the cone bore. The examples H 913842/810/QCL7C and H 913843/810/QCL7C show that structure: the assembly number changes and the 810 bore is maintained, with the QCL7C execution at the end of the code. Send the complete code exactly as it appears on the drawing or on the part so we can quote it.

In Argentine industry these bearings appear in gearboxes, speed reducers, milling equipment, conveyors and agricultural machinery, where the shaft receives radial load and thrust at the same time. They are also found in wheel hubs and in bevel gear transmission assemblies. Because they are tapered roller bearings, mounting is usually done in opposed or matched pairs so that each unit takes the thrust in one direction and the assembly remains guided.

For selection and mounting, take into account the alignment of the raceways and the seat of the cone and cup: misalignment accelerates wear and generates noise. Lubrication must be suited to the speed and working temperature, and the axial clearance of the assembly is adjusted during assembly, not on the loose part. If the equipment operates with vibration or variable load, it is advisable to check the tightening and the condition of the seats before replacing.

Cross-brand equivalences are handled by dimensions and by cross-reference code: when the customer brings a reference from another manufacturer or an unidentified part, the bore diameter, outside diameter and assembly width are compared to find the interchangeable one. MR Accesorios Industriales sells and distributes SKF bearings in Buenos Aires, Argentina, and also manufactures split plummer block housings, ANSI chains and pulleys.

If you need this series or a specific size, send the code by WhatsApp to MR Accesorios Industriales and we'll quote it shortly. You can also write to us with the equipment model or the reference of the old part and we'll indicate the compatible alternative.