SKF C 4122-2CS5V cARB roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- CARB roller bearings
We respond promptly.
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF C 4122-2CS5V
- C 41Series
- CARB roller bearings, C 41 series. For the same bore, each series has a different outside diameter and width.
- 22Bore
- 110 mm bore: 22 × 5.
- 2CS5VSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
C 4122 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF C 4122-2CS5V bearing has a 110 mm bore, a 180 mm outside diameter and a 69 mm width (110 x 180 x 69 mm).
SKF C 4122-2CS5V is a reference of cARB roller bearing, within Bearings. Request a quote for C 4122-2CS5V via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF CARB bearings, identified with the letter C, are self-aligning toroidal roller bearings. They are used when misalignment between shaft and housing must be absorbed and combined radial and axial loads must be supported. In Argentina they are used in mining, cement, steel and power transmission equipment. MR Accesorios Industriales sells this line: send us the part number and we will quote it for you.
The series C designation is read with the letter C followed by a series number and a number indicating the bore size. For example, C 4013-2CS5V corresponds to series C 40 with a bore size 13; C 5918-2CS5V is from series C 59 with bore 18. Part numbers with 2CS5V and other variants are part of the commercial designation and are quoted exactly as they appear on the drawing or spare parts list.
These bearings are chosen in industries where shafts undergo bending or thermal expansion: mills, kilns, conveyor belts, slurry pumps, industrial fans and process equipment. In cement, mining and steel plants in Argentina, CARB bearings replace deep groove ball bearings when alignment is not perfect and high load capacity with simple mounting is required.
To select a CARB bearing, take into account the radial and axial load, the rotational speed and the permissible misalignment of the assembly. Mounting requires shafts and housings machined with suitable tolerances, and lubrication defined according to the environment. Initial alignment and internal clearance influence performance; therefore it is advisable to follow the manufacturer's instructions for each application.
SKF CARB bearings can be interchanged with self-aligning bearings from other brands when dimensions and load capacity match. If you have a part number from another brand or an unidentified part, send us the data and we will indicate the compatible equivalent. We work with the SKF line and quote the exact part number you need.
If you are looking for a CARB bearing for your equipment, send us the part number via WhatsApp. At MR Accesorios Industriales we quote promptly and advise you so that the part is the correct one. Write to us with the model or measurement and we will proceed.
Dimensions
Boundary dimensions of the basic designation C 4122 per ISO 15: 110 x 180 x 69 mm (d x D x B).
- Bore
- 110mm
- Outside diameter (D)
- 180mm
- Width (B)
- 69mm
Frequently Asked Questions
- What are the dimensions of the SKF C 4122-2CS5V bearing?
- The SKF C 4122-2CS5V bearing has a 110 mm bore, a 180 mm outside diameter and a 69 mm width (110 x 180 x 69 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation C 4122.
- What does the letter C mean in the designation of these bearings?
- The letter C identifies CARB bearings within the SKF nomenclature. It is the prefix that groups this family of self-aligning toroidal roller bearings. To interpret the complete part number, send us the designation and we will help you identify the part.
- Where are CARB bearings used in Argentine industry?
- They are used in equipment with shafts that misalign or expand, such as mills, kilns, conveyor belts and pumps. In cement, mining and steel plants they are a common solution for combined loads and demanding assemblies.
- How do I request a quote for an SKF CARB bearing?
- Write to us via WhatsApp with the complete part number, for example C 4013-2CS5V, or with the main housing dimensions. We will quote promptly and confirm the reference you need for your equipment.