SKF 6005-ZNR deep groove ball bearing

SKF 6005-ZNR is a reference of deep groove ball bearing, within Bearings. Request a quote for 6005-ZNR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF deep groove ball bearings with ZNR suffix combine a protective shield and a retaining ring on the outer ring. The shield prevents the entry of contaminants and loss of lubricant, while the ring allows the bearing to be axially fixed in the housing without the need for side covers. They are a compact solution for positions where protection and retention are required in a single component.

The designation of these bearings follows the SKF system: the basic number indicates the size and series. The suffixes -2Z indicate two sheet metal shields, one on each side, and NR indicates that the outer ring incorporates a groove and a retaining ring. Thus, a code such as 6002-2ZNR is a bearing of the 60 series, with two shields and a circlip. The ring facilitates mounting in through housings, since it acts as an axial stop.

These bearings are used in equipment where the interior must be protected from dust and moisture, and at the same time the axial position must be secured. They appear in small electric motors, gearboxes, centrifugal pumps, fans, conveyors and agricultural machinery. In Argentina, they are common in the food, textile, metallurgical industries and in maintenance workshops that replace bearings in imported or locally manufactured equipment.

To select the correct bearing, take into account the load, speed and environment. The 2Z shield is non-contacting, so it allows higher speeds than a contacting seal, but it does not retain moisture as well. Verify that the housing has the groove for the retaining ring and that the shaft meets the appropriate tolerance. Lubrication comes from the factory; if you need to relubricate, choose a version with removable shields or seals. Alignment between shaft and housing is key to avoid parasitic loads.

Regarding equivalences, deep groove ball bearings with similar suffixes from other brands can be interchanged if dimensions and type of protection match. For example, an SKF bearing can be replaced by a bearing from another brand with an equivalent designation, depending on the manufacturer. Always confirm the dimensions and the type of retaining ring before replacing. MR Accesorios Industriales sells SKF, and can advise you on interchangeability.

If you need a quote for an SKF deep groove ball bearing with ZNR suffix, send us the complete part number by WhatsApp. At MR Accesorios Industriales we will reply with the quote and alternatives. We can also help you identify the appropriate replacement if you provide us with the shaft and housing dimensions.