SKF 60/530 N1MAS deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 60/530 N1MAS
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- /530Bore
- 530 mm bore.
- N1MASSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
60/530 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 60/530 N1MAS bearing has a 530 mm bore, a 780 mm outside diameter and a 112 mm width (530 x 780 x 112 mm).
SKF 60/530 N1MAS is a reference of deep groove ball bearing, within Bearings. Request a quote for 60/530 N1MAS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
Deep groove ball bearings are the most widespread bearing design: they carry radial and axial loads in both directions and handle high speeds. This SKF line, identified by the 60 prefix and the N1MAS code, is used in applications requiring a light-section bearing with heavy-duty performance. MR Accesorios Industriales sells and distributes SKF in Buenos Aires, Argentina, and advises you on choosing the right design.
The designation of this series starts with the 60 prefix, which identifies light-section deep groove ball bearings, followed by the bore number that defines the size. In the codes 60/530 N1MAS and 60/800 N1MAS, the slash separates the prefix from the bore number, and the N1MAS block accompanies the design. To read any reference in the series, take the 60 prefix, the bore number and the suffix exactly as they appear in the full code.
These bearings are used in rotating equipment under continuous demand: centrifugal pumps, industrial fans, gearboxes, machine tools, conveyors and process equipment in chemical, food and steel plants. In the Argentine market they are found in plant maintenance, in the cement industry and in power generation equipment. When the application combines radial load with moderate axial load and high speeds, the deep groove ball bearing is the reference choice.
To select the right design, take into account the magnitude and direction of the load, the rotation speed and the type of housing. During mounting, work with the right tools, check the alignment between shaft and housing and follow the lubrication procedure that corresponds to the equipment. Correct fitting and proper lubrication extend bearing service life and reduce vibration in service.
Cross-brand equivalences are resolved by comparing the full designation: prefix, bore number and suffix. If the customer brings a code from another brand or an unidentified part, at MR Accesorios Industriales we cross-reference it with the equivalent SKF reference and tell you the compatible alternative. Interchangeability depends on the main dimensions and the design matching, not only the bore number.
If you need a quote for an SKF deep groove ball bearing, send the full code by WhatsApp to MR Accesorios Industriales. We will quote it shortly and tell you the compatible alternative if you come with a reference from another brand. With more than 80 years in the business, we support workshops and industrial plants in selecting bearings.
Dimensions
Boundary dimensions of the basic designation 60/530 per ISO 15: 530 x 780 x 112 mm (d x D x B).
- Bore
- 530mm
- Outside diameter (D)
- 780mm
- Width (B)
- 112mm
The same size in other brands
Pages from other brands with the basic designation 60/530: 530 x 780 x 112 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 60/530 N1MAS bearing?
- The SKF 60/530 N1MAS bearing has a 530 mm bore, a 780 mm outside diameter and a 112 mm width (530 x 780 x 112 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 60/530.
- How do I request a quote for an SKF deep groove ball bearing?
- Send the full code by WhatsApp to MR Accesorios Industriales, for example 60/530 N1MAS or 60/800 N1MAS. With the reference we will quote it shortly and, if you bring the code from another brand, we will tell you the compatible alternative.
- In which applications is a deep groove ball bearing from this series suitable?
- In rotating equipment with radial and moderate axial load and high speeds: pumps, fans, gearboxes, machine tools and conveyors. It is a general-purpose design for industrial maintenance and process plants.
- What data do I need to choose the right design?
- The radial and axial load, the rotation speed, the type of housing and the lubrication method of the equipment. With that data and the full code we will guide you on the SKF reference that corresponds to your application and quote it by WhatsApp.