SKF 51196 F thrust ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Thrust ball bearings
We respond promptly.
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 51196 F
- 511Series
- Thrust ball bearings, 511 series. For the same bore, each series has a different outside diameter and width.
- 96Bore
- 480 mm bore: 96 × 5.
- FSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
51196 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 51196 F bearing has a 480 mm bore, a 580 mm outside diameter and a 80 mm height (480 x 580 x 80 mm).
SKF 51196 F is a reference of thrust ball bearing, within Bearings. Request a quote for 51196 F via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF thrust ball bearing is a component designed to support predominantly axial loads in one direction. It is used in applications requiring high axial load capacity and rigidity, such as gearboxes, pumps, compressors and spindles. Its design with balls and flat washers allows smooth operation and a long service life. MR Accesorios Industriales sells this line as a brand, with technical advice to select the correct size.
The designation of the 511 series follows a clear scheme: the number 511 indicates that it is a single-direction thrust ball bearing with flat washers. Suffixes can provide additional information: for example, the letter F indicates a variant with a stamped steel cage. In the examples 51172 F and 51180 F, the number 51172 or 51180 corresponds to the size (bore and outside diameter), and the final F confirms the metal cage. Knowing these codes makes identification easier when replacing or ordering a part.
These bearings are used in industries such as metallurgy, cement, paper and food. They are common in low-speed, high axial load applications: rotary tables, presses, vertical centrifugal pumps, gear reducers and lifting equipment. In Argentina, they are found in machinery for steel production, flour mills and aggregate processing plants. Their ability to support thrust in one direction makes them ideal for assemblies where axial load is dominant and radial loads are minimal.
To correctly select a thrust ball bearing, take into account the axial load it must support, the rotation speed and the environmental conditions. It is essential to verify alignment between the washers, since these bearings do not allow angular misalignment. Proper lubrication (grease or oil) extends service life and reduces wear. Sealing will depend on the environment: in contaminated environments, additional protection is recommended. During mounting, ensure that the support surfaces are flat and parallel to avoid eccentric loads that damage the balls and raceways.
Regarding equivalents, SKF thrust ball bearings can be interchanged with those from other brands that follow the same dimensional designation, such as FAG, NSK or NTN. However, it is important to verify tolerances and cage type, as they may vary between manufacturers. Not all suffixes match; therefore, it is always advisable to compare the critical dimensions (bore, outside diameter and height) before replacing. At MR Accesorios Industriales we can guide you on interchangeability without compromising equipment performance.
If you need an SKF thrust ball bearing, send us the complete part number via WhatsApp and we will quote you promptly. At MR Accesorios Industriales we advise you so that you choose the correct option for your application. Do not hesitate to ask us about sizes, variants or equivalents: we are here to help you.
Dimensions
Boundary dimensions of the basic designation 51196 per ISO 104: 480 x 580 x 80 mm (d x D x H).
- Bore
- 480mm
- Outside diameter (D)
- 580mm
- Height (H)
- 80mm
The same size in other brands
Pages from other brands with the basic designation 51196: 480 x 580 x 80 mm (d x D x H) per ISO 104.
They share the boundary dimensions set by ISO 104, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 51196 F bearing?
- The SKF 51196 F bearing has a 480 mm bore, a 580 mm outside diameter and a 80 mm height (480 x 580 x 80 mm). These are the standardised boundary dimensions (ISO 104) of the basic designation 51196.
- What does the F suffix mean in an SKF thrust ball bearing?
- The F suffix indicates that the bearing has a stamped steel cage. This cage guides the balls and withstands moderate temperatures. It is important to verify that the cage is compatible with the lubrication and speed conditions of your application.
- Does this bearing support radial loads?
- No, thrust ball bearings are designed to support predominantly axial loads. Radial loads must be minimal or none. If your application combines axial and radial loads, consider another type of bearing, such as an angular contact bearing.
- How is a thrust ball bearing mounted?
- It is mounted with the washers aligned and the support surfaces flat and parallel. The axial load must be applied uniformly. It is crucial not to strike the washers during mounting and to lubricate properly before start-up.