LINK-BELT CHBS2M30E hanger bearing

LINK-BELT CHBS2M30E is a reference of hanger bearing, within Bearing housings. Request a quote for CHBS2M30E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Link-Belt 200 series hanger bearing is a mounted bearing that is fastened suspended on the shaft to support it over long transmission runs. It is used in conveyors, elevators and line shafts where the shaft needs an intermediate support point. MR Accesorios Industriales sells this Link-Belt line and advises you on choosing the variant that matches your shaft and your application.

The designation of these hanger bearings is read in blocks: the initial letters identify the hanger bearing family, the number that follows indicates the mounted bearing series and the final suffix defines the construction variant. In the 200 series, for example, the references CHBS2M30E, CHBS2M35E and CHBS2M40E share the same base and change the middle number, which corresponds to the shaft diameter for which the housing is machined. That number is the data worth having on hand when requesting a quote.

These hanger bearings appear in belt and chain conveyors, bucket elevators, screw conveyors, line shafts in grain plants, mills, feed plants and material handling equipment. In Argentina they are found in the food, chemical, cement and aggregate industries, where the line shaft is long and needs intermediate support so it does not flex or vibrate. They are also used in process equipment that operates under continuous load and requires a support point between two main bearings.

To select the correct hanger bearing you must start from the shaft diameter and the type of mounting the structure allows. Then the sealing is defined: in dusty, wet or washdown environments a more closed protection is advisable, and in high-temperature areas the lubricant and seal material must be reviewed. Installation requires aligning the hanger bearing with the main bearings, tightening the mounting without deforming the housing and lubricating according to the duty cycle. Poor alignment accelerates wear on the bearing and the seal.

Hanger bearings from different brands with their own designation criteria coexist on the market. Interchangeability is not resolved by shaft diameter alone: the bearing type, the shaft attachment system, the sealing and the mounting dimensions must be compared. At MR Accesorios Industriales we indicate the compatible option and, if needed, we quote it. The Link-Belt 200 series is a common reference and has equivalents in other mounted bearing lines.

If you need a hanger bearing for your equipment, send us via WhatsApp the code on the nameplate or drawing, or the shaft diameter and a photo of the installation. With that data we quote the corresponding Link-Belt reference and indicate the compatible alternative if your application calls for another configuration.