Hanger bearing LINK-BELT CHBS2M40E

LINK-BELT CHBS2M40E is a hanger bearing reference, within Bearing housings. Request a quote for CHBS2M40E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt 200 series hanger bearing is a mounted bearing that is suspended on the shaft to support it over long transmission runs. It is used in conveyors, elevators and line shafts where the shaft needs an intermediate support point. MR Accesorios Industriales supplies this Link-Belt line and advises you to choose the variant that matches your shaft and application.

The designation of these hanger bearings is read in blocks: the initial letters identify the hanger bearing family, the number that follows indicates the mounted bearing series and the final suffix defines the construction variant. In the 200 series, for example, the references CHBS2M30E, CHBS2M35E and CHBS2M40E share the same base and change the central number, which corresponds to the shaft diameter for which the housing is machined. That number is the data you should have on hand when requesting a quote.

These hanger bearings appear in belt and chain conveyors, bucket elevators, screw conveyors, line shafts in grain plants, mills, feed mills and material handling equipment. In Argentina they are found in food, chemical, cement and aggregate industries, where the line shaft is long and needs intermediate support to avoid flexing or vibrating. They are also used in process equipment that operates under continuous load and requires a support point between two main bearings.

To select the correct hanger bearing, start with the shaft diameter and the type of mounting the structure allows. Then define the sealing: in dusty, wet or washdown environments a more closed protection is advisable, and in high-temperature areas the lubricant and seal material must be reviewed. Installation requires aligning the hanger bearing with the main bearings, tightening the mounting without deforming the housing and lubricating according to the duty cycle. Poor alignment accelerates wear on the bearing and seal.

Hanger bearings from different brands with their own designation criteria coexist in the market. Interchangeability is not resolved by shaft diameter alone: the bearing type, shaft locking system, sealing and mounting dimensions must be compared. When the original code is not available or an alternative is sought, at MR Accesorios Industriales we indicate the compatible option and, if necessary, manufacture it to measure. The Link-Belt 200 series is a common reference and has equivalents in other mounted bearing lines.

If you need a hanger bearing for your equipment, send us via WhatsApp the code on the nameplate or drawing, or the shaft diameter and a photo of the installation. With that data we will quote the corresponding Link-Belt reference and indicate the compatible alternative if your application requires another configuration. MR Accesorios Industriales has more than 80 years in the industry and responds promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.