Hanger bearing LINK-BELT CHBS2E32E

LINK-BELT CHBS2E32E is a hanger bearing reference, within Bearing housings. Request a quote for CHBS2E32E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt 200 series hanger bearing is a mounted bearing with a split housing, designed to be mounted suspended on conveying and elevating structures. It is used when the shaft must be supported from above, with the possibility of alignment and disassembly without moving the equipment. MR Accesorios Industriales carries this line for process, cement, mining and material handling plants in Buenos Aires, Argentina.

The designation CHBS2E20E, CHBS2E26E or CHBS2E32E is read in blocks: the initial letters identify the split hanger bearing family; the number 2 indicates the 200 series; the letter E refers to the contact seal design; and the final number (20, 26 or 32) indicates the shaft diameter for which the housing is machined. That combination allows ordering the bearing with the full part number and avoiding confusion with other series from the same brand.

These bearings appear in belt conveyors, bucket elevators, screw conveyors and crushing plant belts. In Argentina they are seen in cement plants, quarries, aggregate plants, sugar mills and food establishments. The advantage of hanger mounting is that the bearing is suspended from the upper structure, which simplifies shaft layout and allows compensating for misalignments typical of long equipment or equipment subject to vibration.

To select the bearing, check the shaft diameter and the mounting thread pitch. Contact seal protection guards against dust and moisture, but requires adequate lubrication and periodic clearance checks. During mounting, align the housing with the shaft before tightening the screws and avoid striking the seal. The 200 series accepts moderate loads and the usual speeds of continuous conveying.

Link-Belt 200 series hanger bearings interchange with other brands of mounted bearings of similar configuration and series. Equivalence is defined by shaft diameter, mounting type and housing dimensions. Matching the part number is not enough: the mounting height and sealing system must be compared. MR Accesorios Industriales indicates the compatible alternative if you need to replace one brand with another.

If you have the part number CHBS2E20E, CHBS2E26E, CHBS2E32E or your equipment model, send it by WhatsApp to MR Accesorios Industriales. We will quote the Link-Belt 200 series hanger bearing and advise you on installation. We also manufacture split housings to order and have more than 80 years of experience in industrial distribution in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.