LINK-BELT CHBS2E26E hanger bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT CHBS2E26E is a reference of hanger bearing, within Bearing housings. Request a quote for CHBS2E26E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The Link-Belt hanger bracket is a mounted bearing with a split housing, designed to be mounted suspended on conveying and elevating structures. It is used when the shaft must be supported from above, with the possibility of alignment and removal without moving the equipment. MR Accesorios Industriales sells this line for process, cement, mining and material handling plants in Buenos Aires, Argentina.
The designation CHBS2E20E, CHBS2E26E or CHBS2E32E is read in blocks: the initial letters identify the split hanger bracket family; the number 2 indicates the series; the letter E refers to the contact seal version; and the final number (20, 26 or 32) indicates the shaft diameter for which the housing is machined. That combination lets you order the bracket with the complete code and avoid confusion with other series from the same brand.
These brackets appear in belt conveyors, bucket elevators, screw conveyors and crushing plant belts. In Argentina they are seen in cement plants, quarries, aggregate plants, sugar mills and food facilities. The advantage of suspended mounting is that the bearing hangs from the upper structure, which simplifies shaft layout and allows compensation for misalignments typical of long equipment or equipment subject to vibration.
To select the bracket, check the shaft diameter and the mounting thread pitch. Contact seal sealing protects against dust and moisture, but requires adequate lubrication and periodic clearance checks. During mounting, align the housing with the shaft before tightening the bolts and avoid striking the seal. The series handles moderate loads and the usual speeds of continuous conveying.
Link-Belt hanger brackets are interchangeable with other brands of mounted bearings of similar configuration and series. Equivalence is defined by shaft diameter, fastening type and housing dimensions. Matching the code alone is not enough: the mounting height and the sealing system must be compared. MR Accesorios Industriales tells you the compatible alternative if you need to replace one brand with another.
If you have the code CHBS2E20E, CHBS2E26E, CHBS2E32E or your equipment model, send it via WhatsApp to MR Accesorios Industriales. We will quote the Link-Belt hanger bracket and advise you on installation. We also manufacture custom split brackets.
Dimensions
- Bore
- 1 5/8 in
Frequently Asked Questions
- What does the code CHBS2E20E mean?
- The letters CHBS indicate split hanger bracket; the 2 corresponds to the series; the E refers to the contact seal; and the final number (20, 26 or 32) is the shaft diameter. With that complete code you can request a quote for the exact bracket.
- How do I know if this bracket replaces the one on my equipment?
- Compare the shaft diameter, the mounting height and the sealing type. The Link-Belt series is interchangeable with other brands of similar mounted bearings. If you send me the original code, I will tell you the compatible alternative.
- What lubrication does the hanger bracket use?
- Use the grease recommended by the equipment manufacturer and follow the relubrication frequency according to the environment. In dusty or humid areas, shorten the intervals and check the seal. MR Accesorios Industriales advises you according to your application.