Flange bearing 3 holes DODGE LF-SCEZ-104S-SHCR

DODGE LF-SCEZ-104S-SHCR is a flange bearing 3 holes reference, within Bearing housings. Request a quote for LF-SCEZ-104S-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCEZ LF SHCR series insert bearing Y-bearing unit is a mounted 3-bolt flange unit that combines an insert bearing with a cast iron housing. It is used to support and guide rotating shafts in power transmission equipment, where firm mounting and simple alignment are required. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in the field.

The SCEZ LF SHCR series designation is built from several blocks. SCEZ identifies the family of 3-bolt flange housings with insert bearing; LF indicates the housing configuration and locking type; SHCR corresponds to the insert with its seals and mounting characteristics. The number that appears in the middle, as in LF-SCEZ-104S-SHCR, indicates the shaft size for which the unit is intended. With that complete code you can request a quote.

These housings are found in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and industrial fans. In Argentina they are common in food plants, cement plants, tanneries and agro-industrial facilities, where the environment has dust, humidity or frequent washdowns. The 3-bolt flange allows mounting onto sheet metal or structure with a bolt pattern that distributes the load and keeps the shaft perpendicular to the mounting surface.

To choose the unit well, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. The insert seal defines protection against dust and water: the greater the exposure, the more advisable a tighter labyrinth. Lubrication of the insert bearing is done through a grease fitting and must be renewed according to the operating regime. During mounting, check that the flange seats flat, that the bolts are tightened in a cross pattern and that the shaft is aligned with the drive equipment.

DODGE is a reference brand in mounted housings and its designations often have equivalents in other insert bearing lines. Interchangeability is not automatic: you must compare the shaft diameter, the distance between flange holes, the center height and the insert locking type. If you have another brand's code, send it and at MR Accesorios Industriales we will indicate the compatible alternative from the SCEZ LF SHCR series.

To request a quote, send via WhatsApp the complete code that appears on the plate or drawing, for example LF-SCEZ-104S-SHCR, together with the quantity and type of application. If you need a variant that does not appear in the listing, write to us with the model or shaft dimensions and we will quote it shortly. We can also advise you on mounting and lubrication of the housing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.