DODGE LF-SCEZ-104S-SHSS flange bearing 3 holes

DODGE LF-SCEZ-104S-SHSS is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for LF-SCEZ-104S-SHSS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCEZ Y-bearing insert flange unit is a 3-bolt flange mounted unit that combines an insert ball bearing with a cast iron housing. It is used to support rotating shafts in equipment where a compact, rigid mounting is required, with the possibility of aligning and mounting the assembly directly onto a flat surface. It is a common solution in low and medium duty transmissions, and MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The SCEZ series designation is read in blocks: the letters identify the Y-bearing insert housing family, and the numbers that follow indicate the shaft diameter for which the insert bore is intended. In the example LF-SCEZ-104S-SHSS, the numeric suffix 104 corresponds to a standard shaft size within the series, while the final letters SHSS refer to the sealing configuration and the housing. To choose the correct part number, the most practical approach is to start from the shaft diameter and the mounting type.

These housings are used in belt conveyors, bucket elevators, mixers, screens and continuous process lines. In Argentina they are common in food plants, cement plants, quarries and agro-industrial facilities, where the environment usually has dust, humidity or frequent washdowns. The 3-bolt flange allows the unit to be fastened onto sheet metal or a steel structure with a bolt pattern that simplifies mounting and replacement on existing equipment.

To select the housing, check the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions. The insert seal defines the protection against dust and water: in applications with washdown or heavy dirt, a configuration with reinforced seals is advisable. Mounting requires that the support surface be clean and flat, and that the bolts be tightened evenly so as not to deform the housing. The insert is lubricated for life at the factory, so it does not require subsequent greasing under normal service.

As for equivalents, Y-bearing insert housings are interchangeable between brands by shaft diameter and flange type, but not all part numbers match in sealing, housing material or insert locking system. Therefore, before replacing a unit, it is advisable to compare the flange geometry, the hole spacing and the type of shaft locking. MR Accesorios Industriales can indicate the compatible alternative from the original part number or the assembly dimensions.

If you need to replace a DODGE SCEZ Y-bearing insert flange unit, send the complete part number by WhatsApp to MR Accesorios Industriales. You can also send a photo of the part and the shaft and flange dimensions: with that data we will quote the unit or the alternative that best suits your equipment. We handle technical inquiries from plants and workshops throughout the country.