DODGE LF-SCEZ-104-SHSS flange bearing 3 holes

DODGE LF-SCEZ-104-SHSS is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for LF-SCEZ-104-SHSS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCEZ series 3-bolt flange bracket is a mounted bearing with a ball insert, designed to secure rotating shafts to a flat surface. It is used when the shaft must sit perpendicular to the mounting surface and the load combines moderate radial and axial forces. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, and advises you on choosing the right variant based on shaft diameter and mounting type.

The SCEZ series designation reads in blocks: the LF prefix indicates the 3-bolt flange configuration; SCEZ identifies the bracket family with insert bearing; the three-digit number that follows encodes the shaft diameter. The SHSS suffix indicates the sealing type and the insert. To request a quote, send us the full part number: with that we identify the exact variant.

These brackets are found in belt conveyors, bucket elevators, mixers, blowers and packaging lines. In Argentina you find them in food plants, cement plants, cold storage facilities and grain warehouses, where the environment has dust, humidity or frequent washdowns. The 3-bolt flange allows mounting on sheet metal or structures with aligned holes, and the ball insert tolerates slight misalignment without stressing the shaft.

To select correctly, check the shaft diameter and the insert mounting type: there are versions with set screws and with an eccentric collar. SHSS sealing protects against dust and splashes; if there is pressure washing, consider additional protection. During mounting, rest the flange on a clean, flat surface, tighten the three bolts in a cross pattern and verify that the shaft turns freely. Lubricate according to the duty cycle and check alignment before start-up.

DODGE is a benchmark brand in mounted bearings and MR Accesorios Industriales sells it in Buenos Aires, Argentina. If you need to replace a bracket from another brand, the most practical approach is to compare the shaft diameter, the distance between holes and the insert type. With that data we indicate the compatible alternative within the SCEZ line or other equivalent series. The part number does not have to be identical: what matters is that the mounting interface matches.

If you already have the part number of the bracket you use, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. If you do not have it on hand, send us the shaft diameter and a photo of the mounting and we will help you identify it. We can also look at alternatives if you need a variant with a different seal or mounting.