Radial shaft seal DBH 9354 — 32.00 x 65.00 x 10.00

DBH 9354 is a radial shaft seal reference, within Seals. Request a quote for 9354 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9354 radial shaft seal is a lip seal that closes the passage of oil or grease between a rotating shaft and its housing. With 32 mm shaft diameter, 65 mm housing and 10 mm height, it is press-fitted into covers, reduction boxes and pumps. Its Lx design combines a sealing lip with a spring that maintains pressure on the shaft. It is a wear part: when leakage appears, it is replaced by size. At MR Accesorios Industriales we quote it by WhatsApp.

The DBH 9354 is a radial-type seal with the nominal dimensions shown in its designation: 32.00 mm shaft diameter (d), 65.00 mm housing diameter (D) and 10.00 mm height (h). The Lx design corresponds to a seal with a sealing lip and spring, designed for lubricated rotating shafts. The DBH nomenclature identifies the seal line that MR carries. Before mounting, verify that the shaft and housing are clean and free of burrs.

These seals are used in gearboxes, reducers, centrifugal pumps, electric motors and transmission equipment. They also appear in machine tools, conveyors and process equipment where oil or grease must be retained and dust ingress prevented. The 32 x 65 x 10 size is common on small-diameter shafts with standard housings. If the equipment works with high vibration or temperature, it is advisable to check the condition of the lip and the spring before replacing the part.

To select the seal correctly, take into account the shaft speed, the working temperature and the type of lubricant. The Lx design with spring is suitable for rotating shafts with moderate pressure. During mounting, lubricate the lip with the same oil as the equipment, insert the seal perpendicular to the shaft and apply force on the outer ring, never on the lip. If the housing has a groove or a chamfer, respect the depth so that the seal seats fully.

If you need a nearby size or an equivalent, send us part number 9354 together with the shaft and housing dimensions. It also helps to send a photo of the old part or the equipment drawing. At MR Accesorios Industriales we check the designation against the manufacturer's product page to confirm that the seal matches in diameters, height and lip type. This way we avoid returns due to differences of millimeters or a design that does not correspond.

MR Accesorios Industriales carries the DBH brand. If you want to request a quote for seal 9354 or ask about another size in the line, write to us by WhatsApp with the part number and dimensions. We will reply with the alternative that best fits your equipment. We can also advise you on mounting and care so that the seal lasts as expected.