Radial shaft seal DBH 9352 — 25.00 x 48.00 x 8.00

DBH 9352 is a radial shaft seal reference, within Seals. Request a quote for 9352 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9352 radial shaft seal is a lip seal mounted in the housing that closes against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With a 25 mm shaft diameter, 48 mm housing and 8 mm height, and Lx design, it is a commonly used size in gearboxes, pumps and electric motors. MR Accesorios Industriales carries it as an official brand.

This item is a DBH 9352 radial shaft seal, identified by its 9352 designation. Its dimensions are 25.00 mm shaft diameter (d), 48.00 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a single-lip seal with metal body and elastomer lip, intended for rotating shafts with lubrication. The lip works on the shaft and the case is press-fitted into the housing, creating the static and dynamic seal.

Typical applications for a seal of this size include gear cases, gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. In all cases it serves to contain the oil or grease inside the assembly and prevent contaminants from entering from outside. It is a wear part that should be replaced when lubricant loss appears or play or roughness is detected in the contact area.

To install it, verify that the housing and shaft are clean, free of burrs or deep marks, and that the shaft surface has the hardness and finish suitable for a radial shaft seal. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, without striking it directly. If the shaft shows wear, consider a neighboring size or a design with an auxiliary lip. The final selection depends on speed, temperature and the working fluid.

If you need an equivalent or a nearby size, send us the 9352 part number, the shaft and housing dimensions, and a photo or sample of the original seal. With that data we review alternatives within the DBH line or from other brands we carry, respecting the dimensions and design type. We can also guide you if the housing has a shoulder or if the seal is mounted on a shaft with a lubrication groove.

To request a quote for the DBH 9352 oil seal or ask about a similar size, write to us by WhatsApp at MR Accesorios Industriales with the part number and dimensions. We will reply with compatible options.