DBH 9355Sil radial shaft seal — 35 x 48 x 8

DBH 9355Sil is a reference of radial shaft seal, within Seals. Request a quote for 9355Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9355Sil radial shaft seal is a lip seal mounted in the housing that seals against the rotating shaft to retain oil or grease and exclude dust and water. With dimensions of 35 mm shaft, 48 mm housing and 8 mm height, and Lx design, it is a common replacement part in gearboxes, pumps and electric motors. MR Accesorios Industriales carries it as part of its seals and oil seals line.

The DBH 9355Sil is a radial shaft seal with single lip and spring, identified by designation 9355Sil. Its nominal dimensions are 35.00 mm shaft diameter (d), 48.00 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a lip and metal case configuration that fits standard installation practices in cylindrical housings. The lip elastomer is formulated to withstand continuous rubbing against the shaft and maintain sealing in the presence of lubricant.

This seal is used in equipment where a shaft rotates inside a lubricated crankcase or cavity. It frequently appears in gearboxes, centrifugal pumps, electric motors, conveyor rollers and machine tools. Its function is twofold: prevent lubricant from escaping to the outside and stop the entry of contaminants such as dust, chips or wash water. In these applications, the seal works alongside bearings and bushings, and its correct selection influences the service life of the assembly.

To install the 9355Sil, verify that the shaft has the 35.00 mm dimension and suitable roughness, free of burrs or marks that could damage the lip. The housing must be clean, with the 48.00 mm diameter and free of deformation. Before inserting it, lubricate the lip with the same oil or grease used in the equipment and use an installation tube that presses on the case, never on the lip. The 8.00 mm height defines the available axial space; respect it so the seal seats fully and is not exposed.

To quote code 9355Sil or the 35 x 48 x 8 mm dimensions, send us an equivalent from another brand via WhatsApp. You can also indicate the equipment where it is mounted and a photo of the old seal. At MR Accesorios Industriales we compare that data with the manufacturer's data sheet to offer you the compatible alternative within the DBH line. If the Lx design does not match your housing, we evaluate alternatives in the same category.

MR Accesorios Industriales carries the DBH brand as part of its seals and oil seals catalog. To obtain a quote, write to us on WhatsApp with code 9355Sil or the 35.00 x 48.00 x 8.00 mm dimensions. Our technical team helps you validate the application and choose the right seal for your equipment.