DBH 6210 radial shaft seal — 10 x 19 x 7

DBH 6210 is a reference of radial shaft seal, within Seals. Request a quote for 6210 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6210 radial shaft seal is a lip seal that mounts on the shaft and closes against the housing to retain lubricant and block the ingress of dust, water or particles. Its Lx design and dimensions of 10 mm shaft, 19 mm housing and 7 mm height make it suitable for compact equipment where space is limited. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a radial shaft seal from the DBH brand, identified with part number 6210. Its dimensions are 10 mm shaft diameter, 19 mm housing diameter and 7 mm height. The Lx design corresponds to a single lip configuration with spring, intended for rotating shafts with permanent lubrication. The elastomer lip runs on the shaft and the outer metal case is press-fitted into the housing. It is a standard replacement part within the seals and oil seals category that MR Accesorios Industriales sells.

Typical applications for a 10 x 19 x 7 mm seal appear in small electric motors, low-power centrifugal pumps, compact gearboxes, gear cases, fans and light transmission equipment. In all cases it serves to prevent oil or grease leaks and to protect the internal bearings against external contamination. It is also used in machine tools, laboratory equipment and automation devices where the shaft rotates at moderate speeds and radial space is limited.

To install this seal, verify that the shaft measures 10 mm and the housing 19 mm, without burrs or marks that could damage the lip. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and apply force on the outer face of the case, never on the elastomer. The 7 mm height should sit flush or slightly recessed depending on the housing design. If the shaft shows wear, consider a seal with the lip in another position.

If you need an equivalent, send us part number 6210 along with the shaft, housing and height measurements, and the equipment brand. A photo of the old seal or the housing drawing also works. With that data we indicate the alternative in the same series or in another brand that MR Accesorios Industriales sells. The part number does not need to be exact: we can search by dimensions and design type.

To request a quote for the DBH 6210 seal, write to us on WhatsApp and send us the part number and measurements. The technical team at MR Accesorios Industriales replies with the alternative that best fits your equipment. You can also ask about other seals, bearings, housings or power transmission products within the same product line.