Radial shaft seal DBH 6206 — 9.52 x 19.05 x 5.55

DBH 6206 is a radial shaft seal reference, within Seals. Request a quote for 6206 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6206 radial shaft seal is a lip seal that prevents oil or grease leaks and keeps dust out of rotating shafts. With dimensions of 9.52 mm shaft, 19.05 mm housing and 5.55 mm height, and Lz design, it is press-fitted into housings or covers. It is a common wear part in electric motors, pumps and gear reducers, where the lubricant must be contained and the environment must not penetrate the bearing.

This item is a radial shaft seal from the DBH brand, identified with part number 6206. Its dimensions are 9.52 mm shaft diameter (d), 19.05 mm housing diameter (D) and 5.55 mm height (h). The Lz design corresponds to a single lip configuration with spring, suitable for rotating shafts with lubrication. The lip elastomer seals against the shaft and the outer metal case fits into the housing. It is a standard part within the radial seals and shaft seals category that MR carries.

Typical applications for a seal of these dimensions include small electric motors, centrifugal pumps, gear reducers, compressors and transmission equipment. In all cases it serves to retain the lubricant inside the assembly and block dust, moisture or particles that could damage the bearings. It is also used in gearboxes and spindles where radial space is limited and a reliable seal is needed at moderate speeds.

To correctly select this seal, verify that the shaft diameter is within the recommended tolerance for radial seals and that the housing has the appropriate diameter and depth. The Lz design requires a ground and lubricated shaft surface to avoid damaging the lip during installation. It is important to align the seal with the shaft and use an installation tool that presses on the metal edge, never on the lip. If the equipment operates with high vibration or temperature, ask about material variants.

If you need an equivalent seal or a nearby size, you can send us part number 6206 or the measurements of your sample. We can also look for alternatives in other brands or with slight dimensional differences, as long as the space allows it. To do so, send a photo of the original seal, the measurements taken with a caliper or the housing drawing. At MR Accesorios Industriales we review the manufacturer's data sheet and confirm the closest option for a quote.

To request a quote for this DBH 6206 seal, write to us on WhatsApp and send us the part number or the dimensions 9.52 x 19.05 x 5.55 mm. We will reply with the quote and alternatives if there is no exact match. You can also ask about other seals, bearings or transmission supplies we carry. We are in Buenos Aires, Argentina, and serve industries and factories throughout the country.