Radial shaft seal DBH 9076 — 20.00 x 35.00 x 8.00

DBH 9076 is a radial shaft seal reference, within Seals. Request a quote for 9076 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9076 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 20 mm shaft diameter, 35 mm housing diameter and 8 mm height, and an Lx design, it is press-fitted into gearboxes, covers and housings to protect bearings and stop leaks. It is a wear part: when the lip hardens or gets marked, it should be replaced before the lubricant escapes and dirt gets in.

The DBH 9076 is a radial lip seal with the dimensions shown in its designation: 20.00 mm shaft diameter (d), 35.00 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a single lip seal with spring, intended for rotating shafts with lubrication. DBH is a brand that MR carries, so you will find it within our line of radial seals and oil seals.

It is used in equipment where a shaft rotates inside a lubricated housing: electric motors, pumps, gear reducers, conveyor belts, mixers and machine tools. It also appears in simpler applications, such as rollers, drive shafts and washing or processing equipment. In every case it performs the same function: retaining the lubricant on the inside and keeping dust, water or particles from getting in from the outside.

To install it correctly, check that the shaft diameter and the housing diameter match the values on the product page. The lip should be lubricated and the shaft must be clean, with no burrs or marks in the contact area. The seal is pressed in, perpendicular to the shaft, without striking the lip. If the shaft is worn, a nearby size or a seal with the lip in a different position may solve the problem, but that is determined with the manufacturer's data sheet in hand.

If you need an equivalent or a close size, send us part number 9076 along with the shaft, housing and height dimensions. A photo of the old seal or the assembly drawing also helps. With that data we check the DBH line and compatible alternatives, and confirm which option fits without modifying the housing. If space allows, we evaluate Lx design variants with other heights or materials.

MR Accesorios Industriales has been supplying seals and oil seals for more than 80 years, with technical support so you don't buy blindly. If you already have part number 9076 or the dimensions at hand, write to us on WhatsApp and we'll send you a quote. We can also help you identify the seal if all you have is the disassembled shaft. Send your inquiry with the part number or the dimensions and we'll reply with the option that best suits your equipment.