Radial shaft seal DBH 9074Vit — 18.00 x 35.00 x 7.00

DBH 9074Vit is a radial shaft seal reference, within Seals. Request a quote for 9074Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9074Vit radial shaft seal is a lip seal that is fitted into the housing and runs against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With an 18 mm shaft, 35 mm housing and 7 mm height, and Lx design, it is a small size commonly used in compact equipment. MR Accesorios Industriales sells this official brand and helps you confirm that it is the right size before quoting.

This item is a DBH radial shaft seal with the designation 9074Vit, with the following dimensions: shaft diameter 18 mm, housing diameter 35 mm and height 7.00 mm. The stated design is Lx, which corresponds to a seal with a single lip, metal case and sealing lip. It is a sealing component intended for rotating shafts, not for reciprocating motion or high pressures. The nominal size is read as 18 x 35 x 7 mm, always in that order: shaft, housing and height.

Typical applications for a seal of this size appear in small centrifugal pumps, low-power electric motors, compact gearboxes, gear cases, compressors and power transmission equipment. It is also used in machine tools, washing equipment and irrigation systems where a shaft rotates inside a housing and oil or grease must be contained. In all those cases the seal works as a barrier between the lubricated interior and the environment.

To install it correctly, check that the shaft has the right dimensions and surface finish, free of burrs or marks that could damage the lip. The housing must be clean, free of impacts and with the correct diameter; the seal is inserted perpendicular, without tilting, and it is best to use a tube or spacer that presses on the case and not on the lip. Before fitting it, lubricate the lip with the same grease or oil used in the equipment. If the shaft shows wear, consider a nearby size or a seal with the lip in a different position.

If you need an equivalent or a nearby size, the most practical thing is to send us part number 9074Vit or the dimensions 18 x 35 x 7 mm and tell us which equipment it is fitted to. With that data we can look for alternatives within the DBH line or other brands we sell, always confirming against the manufacturer's data sheet. If space allows, it can sometimes be solved with a seal of a different height or a double-lip design.

To request a quote for this DBH 9074Vit oil seal, write to us on WhatsApp and send us the part number or the dimensions. At MR Accesorios Industriales we have more than 80 years in the industry and we advise you so that you get the right part. If you are unsure between two sizes, send us a photo of the shaft and the housing and we will review it together.