Radial shaft seal DBH 9075 — 20.00 x 35.00 x 6.00

DBH 9075 is a radial shaft seal reference, within Seals. Request a quote for 9075 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9075 radial shaft seal is a lip seal that blocks the passage of oil or grease on rotating shafts and keeps out dust and water. With a 20 mm shaft diameter, 35 mm housing diameter and 6 mm height, it is press-fitted into the housing and runs against the shaft with a flexible lip. It is a common wear part in motors, pumps, gearboxes and power transmission equipment, and replacing it in time prevents lubricant loss and major damage.

This item is a DBH oil seal, identified by part number 9075. Its dimensions are 20.00 mm shaft diameter (d), 35.00 mm housing diameter (D) and 6.00 mm height (h). The Lx design corresponds to a seal with a single sealing lip and metal case, intended for press fitting into a cylindrical housing. The DBH 9075 nomenclature makes it easy to locate in the catalogue and compare against the original part you are replacing.

It is used in equipment where a shaft rotates inside a housing containing lubricant: electric motors, centrifugal pumps, gearboxes, compressors, mixers and belt or chain drives. It also appears in agricultural machinery, roller conveyors and process equipment. In every case it performs two functions: retaining the oil or grease on the inside and blocking contaminants from entering from outside.

To select the right seal, check that the shaft diameter and housing diameter match the values of the original part. The lip must run on a shaft surface free of grooves or deep wear; if there is a groove, consider a seal with an offset lip or a repair sleeve. During installation, lubricate the lip with the same grease or oil used in the equipment, insert it perpendicular to the shaft and tap only on the outer ring, never on the lip.

If you cannot find part number 9075 or need a nearby size, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With those three data points we look for the equivalent in DBH or another brand sold by MR, or we offer you the closest alternative. We can also advise you if the Lx design is not suitable for your application and a different lip type or material is required.

MR Accesorios Industriales sells the DBH brand as an official brand. If you already have part number 9075 at hand, write to us on WhatsApp and we will send you a quote. If you are unsure between two sizes, send a photo of the seal and the shaft and housing dimensions: we will help you confirm which one is right before you install it.