Radial shaft seal DBH 5463Vit — 110.00 x 140.00 x 13.00

DBH 5463Vit is a radial shaft seal reference, within Seals. Request a quote for 5463Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5463Vit radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 110 mm shaft, 140 mm housing and 13 mm height place it in transmission equipment and medium to large machinery. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH radial shaft seal, designation 5463Vit, with a shaft diameter of 110 mm, a housing diameter of 140 mm and a height of 13.00 mm. The Kx design corresponds to a single lip configuration with a spring, intended for rotating shafts with permanent lubrication. The elastomeric lip runs on the shaft surface and the outer metal case fits by interference in the housing, so the seal stays fixed while the shaft rotates. It is a wear part: over time the lip hardens or wears and oil loss appears.

It is used in gearboxes, pumps, electric motors, rollers and transmission equipment where a shaft passes through a housing with lubricant inside. It also appears in agricultural machinery, material handling equipment and process lines that operate with dust or moisture. In all those cases it performs two functions at once: it prevents oil or grease from escaping and slows the entry of contaminants that accelerate wear on bearings and gears.

To select it, verify that the shaft diameter, housing diameter and height match the machined housing. The Kx design defines the lip type and its orientation: if the seal is mounted backwards, the lip does not seal and loss is immediate. Also check the condition of the shaft surface: a mark or deep wear means the shaft must be repaired or a seal with the lip in another position must be used. The housing surface must be clean and free of burrs before pressing.

If you cannot find the exact size or the code 5463Vit does not appear on your list, send us the shaft, housing and height dimensions along with a photo of the old seal. With that data we look for a nearby size or an equivalent from another brand within the same family. We can also check whether the Kx design is suitable for your application or whether another lip configuration is better depending on the type of lubricant and the shaft speed.

MR Accesorios Industriales sells the DBH brand as part of its seals and oil seals line, along with bearings, housings, power transmission and lubricants. If you need a quote for the 5463Vit seal or want to ask about an equivalent size, write to us on WhatsApp with the code and dimensions. We reply with the available alternative and replacement options.