Radial shaft seal DBH 5463 — 110.00 x 140.00 x 13.00

DBH 5463 is a radial shaft seal reference, within Seals. Request a quote for 5463 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5463 oil seal is a radial seal with a 110 mm shaft diameter, 140 mm housing diameter and 13 mm height, with Kx design. It is used to retain lubricant and exclude contaminants in rotating equipment, with the lip resting on the shaft and the body fixed in the housing. It is a common replacement part in pumps, electric motors, gear reducers and gearboxes. MR Accesorios Industriales carries this official brand and advises you on choosing the right seal.

This item is a radial shaft seal from the DBH line, identified with the part number 5463. Its dimensions are 110 mm shaft diameter (d), 140 mm housing diameter (D) and 13.00 mm height (h). The Kx design defines the configuration of the lip and the body, intended for housings and shafts with the tolerances usual in this type of sealing. If you need to confirm the design or the lip material, we verify it against the manufacturer's data sheet before quoting.

Typical applications for a seal of this size include centrifugal pumps, electric motors, speed reducers, gearboxes and transmission equipment. In all cases it serves two functions: retaining the oil or grease inside the assembly and preventing the entry of dust, water or particles. It is also used in process equipment, industrial washing machines and agricultural machinery where the shaft rotates on bearings and the lubricant must be protected.

To install it, check that the shaft has no burrs or wear in the lip area and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil as the equipment before inserting it, and place the seal perpendicular to the shaft, without striking the lip. If the shaft has a groove or wear, evaluate a seal with an offset lip or a repair sleeve. The selection depends on speed, temperature and the fluid to be retained.

If you cannot find the 5463 part number or need a nearby size, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With that data we look for an equivalent in the same brand or in another line we carry. We can also offer you a seal with a similar design if the original is not available. The more complete the equipment information, the faster the response.

To request a quote for the DBH 5463 oil seal, write to us on WhatsApp with the part number and the quantity you need. MR Accesorios Industriales carries this official brand and has more than 80 years of experience in the field. If you have doubts about the installation or want to compare with another size, our technical team replies with concrete data, no runaround.