Radial shaft seal DBH 5462Sil — 68.00 x 90.00 x 13.00

DBH 5462Sil is a radial shaft seal reference, within Seals. Request a quote for 5462Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5462Sil radial shaft seal is a lip seal mounted between a rotating shaft and its housing to retain lubricant and block the entry of dust, water or particles. Its Lx design and its dimensions of 68 mm shaft, 90 mm housing and 13 mm height make it a common replacement part in equipment with medium-section shafts. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH 5462Sil radial shaft seal, with a 68 mm shaft diameter, 90 mm housing diameter and 13.00 mm height. The Lx design corresponds to the construction configuration of the lip and the metal body, intended to retain lubricant in one direction of rotation. The 5462Sil designation identifies the exact size within the DBH line, so it is advisable to verify those three values before replacing a worn part.

Seals of this size are used in gearboxes, pumps, electric motors, drive shafts and process equipment where a shaft rotates inside a fixed housing. They also appear in agricultural machinery, washing equipment and systems exposed to dust or splashes. In all those cases, the function is the same: keep the oil or grease inside and the contaminant outside.

To install it, clean the housing and the shaft, check that there are no burrs or wear marks and lubricate the lip before inserting it. The seal must go in perpendicular, without direct blows on the lip, and sit fully against the bottom of the housing. If the shaft has a deep groove or the housing is out of round, the new seal will not perform: in that case you need to evaluate a repair sleeve or a taller seal.

If you need a nearby size or an equivalent from another brand, send us the 5462Sil part number along with the shaft, housing and height dimensions. With that data we can look for an alternative within the DBH line or from other brands we carry. We can also advise you if the Lx design is not the right one for your application and a different type of lip or material is needed.

MR Accesorios Industriales carries the DBH brand as part of its seals and oil seals catalog. If you want a quote for the 5462Sil or to ask about a similar size, write to us on WhatsApp with the part number and the dimensions. We will reply with the alternative that best fits your equipment.