Brand we market

FAG spherical roller bearings, 223 series: dimensions and part numbers

The FAG 223 series of spherical roller bearings brings together 110 part numbers in our catalogue across 31 basic sizes, from 22308 to 22380: bore (d) from 40 to 400 mm and outside diameter (D) from 90 to 820 mm. Every part number in the table links to its own page, where you can request a quote via WhatsApp or email.

All FAG spherical roller bearings →FAG guide →

223 series dimension table

FAG spherical roller bearings, 223 series: boundary dimensions in millimetres according to ISO 15 and catalogue part numbers.
Basic designation	d	D	B	Same size	Variants
22308	40	90	33	40x90x33	22308-E1-XL 22308-E1-XL-K 22308-E1-XL-K-T41A 22308-E1-XL-T41A
22309	45	100	36	45x100x36	22309-E1-XL 22309-E1-XL-K 22309-E1-XL-K-T41A 22309-E1-XL-T41A
22310	50	110	40	50x110x40	22310-E1-XL 22310-E1-XL-K 22310-E1-XL-K-T41A 22310-E1-XL-T41A
22311	55	120	43	55x120x43	22311-E1-XL 22311-E1-XL-K 22311-E1-XL-K-T41A 22311-E1-XL-T41A
22312	60	130	46	60x130x46	22312-E1-XL 22312-E1-XL-K 22312-E1-XL-K-T41A 22312-E1-XL-T41A
22313	65	140	48	65x140x48	22313-E1-XL 22313-E1-XL-K 22313-E1-XL-K-T41A 22313-E1-XL-T41A
22314	70	150	51	70x150x51	22314-E1-XL 22314-E1-XL-K 22314-E1-XL-K-T41A 22314-E1-XL-T41A
22315	75	160	55	75x160x55	22315-E1-XL 22315-E1-XL-K 22315-E1-XL-K-T41A 22315-E1-XL-T41A
22316	80	170	58	80x170x58	22316-E1-XL 22316-E1-XL-K 22316-E1-XL-K-T41A 22316-E1-XL-T41A
22317	85	180	60	85x180x60	22317-E1-XL 22317-E1-XL-K 22317-E1-XL-K-T41A 22317-E1-XL-T41D
22318	90	190	64	90x190x64	22318-E1-XL 22318-E1-XL-K 22318-E1-XL-K-T41A 22318-E1-XL-T41D
22319	95	200	67	95x200x67	22319-E1-XL 22319-E1-XL-K 22319-E1-XL-K-T41A 22319-E1-XL-T41D
22320	100	215	73	100x215x73	22320-E1-XL 22320-E1-XL-K 22320-E1-XL-K-T41A 22320-E1-XL-T41D
22322	110	240	80	110x240x80	22322-E1-XL 22322-E1-XL-K 22322-E1-XL-K-T41A 22322-E1-XL-T41D
22324	120	260	86	120x260x86	22324-E1-XL 22324-E1-XL-K 22324-E1-XL-K-T41A 22324-E1-XL-T41D
22326	130	280	93	130x280x93	22326-E1-XL 22326-E1-XL-K 22326-E1-XL-K-T41A 22326-E1-XL-T41D
22328	140	300	102	140x300x102	22328-E1-XL 22328-E1-XL-K 22328-E1-XL-K-T41A 22328-E1-XL-T41D
22330	150	320	108	150x320x108	22330-E1-XL 22330-E1-XL-K 22330-E1-XL-K-T41A 22330-E1-XL-T41D
22332	160	340	114	160x340x114	22332-BE-XL 22332-BE-XL-JPA-T41A 22332-BE-XL-K 22332-BE-XL-K-JPA-T41A
22334	170	360	120	170x360x120	22334-BE-XL 22334-BE-XL-JPA-T41A 22334-BE-XL-K 22334-BE-XL-K-JPA-T41A
22336	180	380	126	180x380x126	22336-BE-XL 22336-BE-XL-JPA-T41A 22336-BE-XL-K 22336-BE-XL-K-JPA-T41A
22338	190	400	132	190x400x132	22338-BE-XL 22338-BE-XL-JPA-T41A 22338-BE-XL-K 22338-BE-XL-K-JPA-T41A
22340	200	420	138	200x420x138	22340-BE-XL 22340-BE-XL-JPA-T41A 22340-BE-XL-K 22340-BE-XL-K-JPA-T41A
22344	220	460	145	220x460x145	22344-BE-XL 22344-BE-XL-JPA-T41A 22344-BE-XL-K 22344-BE-XL-K-JPA-T41A
22348	240	500	155	240x500x155	22348-BEA-XL-K-MB1 22348-BEA-XL-MB1
22352	260	540	165	260x540x165	22352-BEA-XL-K-MB1 22352-BEA-XL-MB1
22356	280	580	175	280x580x175	22356-BEA-XL-K-MB1 22356-BEA-XL-MB1
22360	300	Dimension not validated	Dimension not validated		22360-BEA-XL-K-MB1 22360-BEA-XL-MB1
22368	340	Dimension not validated	Dimension not validated		22368-BEA-XL-K-MB1 22368-BEA-XL-MB1
22372	360	Dimension not validated	Dimension not validated		22372-BEA-XL-K-MB1 22372-BEA-XL-MB1
22380	400	820	243		22380-BEA-XL-K-MB1 22380-BEA-XL-MB1

Every part number in this series carries a suffix after the basic designation. The most frequent FAG suffixes, with the number of sizes they appear in: K (31), XL (31), T41A (24), E1 (18), and T41D (9). The suffix defines the variant (sealing, cage, internal clearance or other options): to request a quote, send us the full part number marked on the bearing, the box or the drawing.

How to read the part number: 223 gives the bearing type and the dimension series; for the same bore, each series has a different outside diameter and width. What follows is the bore code: from 04 upwards, multiplying by 5 gives the bore in millimetres (in the 22308, 08 × 5 = 40 mm).

The table gives the boundary dimensions of each basic designation according to ISO 15, in millimetres: d is the bore, D the outside diameter and B the width. These are standardised dimensions: the same basic designation has the same dimensions in every brand. Where a dash appears, the dimension has not been validated yet: we confirm it when we quote.

If the part number on the bearing can no longer be read, measure the bore, the outside diameter and the width, and find the matching row: with that size and the variant you need, we will quote it.

Other FAG spherical roller bearings series

Which FAG 223 series bearing do you need?

Send us the full part number, or the size and the variant, with the quantity: we will quote it via WhatsApp or email.

Request a quote on WhatsApp ventas@mraccesoriosindustriales.com

See all FAG bearings references →