FAG 22314-E1-XL-T41A spherical roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 22314-E1-XL-T41A
- 223Series
- Spherical roller bearings, 223 series. For the same bore, each series has a different outside diameter and width.
- 14Bore
- 70 mm bore: 14 × 5.
- E1-XL-T41ASuffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
22314 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 22314-E1-XL-T41A bearing has a 70 mm bore, a 150 mm outside diameter and a 51 mm width (70 x 150 x 51 mm).
FAG 22314-E1-XL-T41A is a reference of spherical roller bearing, within Bearings. Request a quote for 22314-E1-XL-T41A via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The spherical roller bearing is a self-aligning double-row bearing with a spherical raceway in the outer ring and rollers guided by a cage. It supports radial and axial loads in both directions and accommodates angular misalignment between shaft and housing. The FAG 223 series is used in equipment with flexible shafts or mountings that are not perfectly aligned. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and helps you choose the correct part number.
The 223 series designation reads as follows: the first number indicates the bearing type, and the next two, the dimension series. In the examples 22308-E1-XL-T41A through 22315-E1-XL-T41A, the suffix E1 identifies the execution with higher load capacity, XL the long-life version, and T41A an execution with tolerances and clearance defined for specific applications. The central number (08, 09, 10…) indicates the bore size. With that data you can locate the exact part.
These bearings are used in industries in Argentina where there is vibration, shaft deflection or mountings that are difficult to align: cement plants, mining, steel, paper, aggregate processing, conveyor belts and power transmission equipment. They also appear in gearboxes, high-flow pumps and agricultural machinery. Their self-aligning capability makes them suitable for long shafts and separate supports, where perfect alignment is not possible.
To select the bearing, take into account the radial and axial load, the rotation speed and the shaft diameter. Sealing is key: open versions require external lubrication, and sealed versions retain grease and block contaminants. Internal clearance should be chosen according to the working temperature and the mounting fit. Proper lubrication and correct initial alignment extend service life. If the equipment operates with a lot of dirt, prioritize sealed executions.
In the Argentine market, spherical roller bearings are available in different brands. Interchangeability is based on designation number and dimensions: a 22308 from one brand can replace another 22308 if tolerances and clearance match. To avoid mistakes, send the complete code shown on the bearing or on the drawing. MR Accesorios Industriales supplies the FAG brand and can guide you on the right equivalent.
If you need a quote for a FAG 223 series spherical roller bearing, send the code by WhatsApp to MR Accesorios Industriales. With the exact model we'll reply shortly. You can also ask about other series or variants in the same family.
Dimensions
Boundary dimensions of the basic designation 22314 per ISO 15: 70 x 150 x 51 mm (d x D x B).
- Bore
- 70mm
- Outside diameter (D)
- 150mm
- Width (B)
- 51mm
Same size in SKF and other brands
Pages from other brands with the basic designation 22314: 70 x 150 x 51 mm (d x D x B) per ISO 15.
- Looking for the SKF 22314? We also quote:22314 E22314 EK22314 E/C35 more →
- LINK-BELT22314LB22314LBK22314LBC31 more →
- NSK22314EAE422314EAKE4
- NTN22314EAD122314EMD122314EAKD13 more →
- RKB22314
- TIMKEN22314EJ22314EM
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 22314-E1-XL-T41A bearing?
- The FAG 22314-E1-XL-T41A bearing has a 70 mm bore, a 150 mm outside diameter and a 51 mm width (70 x 150 x 51 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 22314.
- What does the T41A suffix mean on a FAG bearing?
- The T41A suffix indicates an execution with tolerances and internal clearance defined for specific applications, generally associated with particular temperature or mounting conditions. To confirm whether it is the right one for your equipment, send us the complete code and the context of use.
- How do I know if a 22308 bearing is interchangeable with another brand?
- Interchangeability is based on the designation and the main dimensions: bore, outer diameter and width. If the code and measurements match, it can be replaced. It is still advisable to verify tolerances and internal clearance. Ask us with the exact code and we'll help you.
- What lubrication does a spherical roller bearing need?
- It depends on the execution: open ones are lubricated with grease or oil depending on the equipment, and sealed ones come with factory grease. The amount and frequency are defined by the working conditions. For a precise recommendation, consult the equipment manufacturer or write to us.