Spherical roller bearing FAG 22368-BEA-XL-K-MB1

FAG 22368-BEA-XL-K-MB1 is a spherical roller bearing reference, within Bearings. Request a quote for 22368-BEA-XL-K-MB1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

FAG spherical roller bearings are self-aligning double-row components designed to withstand high radial loads and axial loads in both directions, even with misaligned or flexed shafts. Their spherical outer raceway and guided cage allow stable operation under demanding conditions. MR Accesorios Industriales supplies this line as an official brand, with technical advice to select the correct part number for your application.

The 230 series designation is read from left to right: the base number indicates the size and dimension series; the suffix BEA defines the internal design with brass cage and optimized machining; XL corresponds to the high load capacity execution; K indicates the tapered bore (taper 1:12); MB identifies the solid brass cage guided by the inner ring. The final digit, as in 230/500-BEA-XL-K-MB1, distinguishes execution variants within the same series. Understanding these suffixes prevents errors when ordering a replacement.

These bearings are used in equipment with long shafts or shafts subjected to bending, where perfect alignment is not guaranteed. In Argentina they are found in conveyor belts, mills, crushers, high-flow centrifugal pumps, industrial fans and paper machines. Also in gearboxes and drives in mining, cement and steelmaking, where loads are high and working conditions are severe. Their self-aligning capability makes them suitable for assemblies with split housings or housings that allow some misalignment.

To select the correct bearing, take into account the radial and axial load, the rotation speed and the type of lubrication. The tapered bore K requires an adapter sleeve or a controlled interference fit; verify the shaft taper before installing. The MB solid brass cage is suitable for high temperatures and shock loads. Sealing will depend on the environment: in the presence of dust or moisture, it is recommended to complement with oil seals or protection plates. Initial alignment and adequate lubrication extend the service life of the assembly.

When looking for equivalents, remember that each manufacturer uses its own suffixes to indicate design, cage and tolerances. A bearing from another brand with similar dimensions may not be interchangeable if the internal execution or clearance changes. Always verify the complete part number and technical specifications before replacing. MR Accesorios Industriales can advise you on the correspondence between designations, but final validation must be done with the original manufacturer's tables.

If you need a FAG spherical roller bearing, write to us on WhatsApp with the part number or model you are looking for. We will reply shortly with the quote and the technical information you need. MR Accesorios Industriales, with more than 80 years in the market, supports Argentine industry with products and specialized advice.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.