SAF split plummer block housing SKF SAF 22511/C3

SKF SAF 22511/C3 is a sAF split plummer block housing reference, within Bearing housings. Request a quote for SAF 22511/C3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SAF SKF split housing is a housing split into two halves that allows the bearing to be mounted and dismounted without dismantling the shaft or the transmission. It is used in equipment where access is difficult or where maintenance must be quick. MR Accesorios Industriales supplies this line with technical advice to choose the correct configuration according to the bearing, the sealing and the working conditions.

The designation SAF …/C… is read as follows: SAF identifies the category of split housings; the number that follows indicates the size and series of the bearing it houses; the slash separates the suffix C…, which defines sealing or configuration variants. For example, SAF 22511/C3 corresponds to a housing for a bearing of series 22511 with a C3 sealing variant. The suffixes are not interchangeable: each combination responds to a specific sealing and fastening design.

In Argentine industry, SAF housings are seen in mineral conveyors, mills, centrifugal pumps, industrial fans and process equipment in chemical and food plants. Also in paper and pulp machines, where the humid environment demands good sealing. Their split format simplifies maintenance on continuous production lines, because it allows the bearing to be replaced without dismounting pulleys, couplings or other shaft components.

To select the housing, verify that the bearing series matches that of the housing and that the sealing is suitable for the environment: grease, dust, water or vapors. Mounting requires cleaning the support surfaces, checking shaft alignment and lubricating according to the bearing type. The halves are tightened with screws; internal clearance and preload are defined in the bearing, not in the housing. Follow the manufacturer's instructions for tightening and lubrication.

SAF housings from different brands are usually interchangeable if they share standardized dimensions and bearing type. The code alone is not enough: you must compare shaft diameter, center height, distance between holes and sealing configuration. At MR Accesorios Industriales we help you verify the equivalence before quoting, so that the replacement works without surprises.

If you have the housing or bearing code, send it by WhatsApp to MR Accesorios Industriales. With that data and a photo of the assembly, we will send you the quote and confirm the configuration you need.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.