SAF split plummer block housing SKF SAF 038 KAX6.15/16 K7

SKF SAF 038 KAX6.15/16 K7 is a sAF split plummer block housing reference, within Bearing housings. Request a quote for SAF 038 KAX6.15/16 K7 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF SAF split plummer block housing is a bearing mounting component that is assembled in two halves, which facilitates installation and maintenance on rotating equipment. It is used to house bearings with a tapered bore and adapter sleeve, providing support and protection in demanding industrial applications. MR Accesorios Industriales carries this line as part of its range of bearing housings.

The designation of SKF SAF split plummer block housings combines several elements. For example, in SAF 028 KAX4.15/16 K7, the prefix SAF indicates the split plummer block housing series with labyrinth-type sealing. The number 028 corresponds to the housing size, which defines the main dimensions. The letters KAX indicate the type of bearing and adapter sleeve it houses, and 4.15/16 is the shaft diameter in inches. The suffix K7 refers to a sealing or configuration variant. In SAF 038 KAX6.15/16 K7, the size is larger and so is the shaft diameter. Knowing these codes allows you to select the right housing for each application.

These housings are used in a wide variety of industries in Argentina, such as food, cement, mining, petrochemical and aggregate processing. They are found in belt conveyors, bucket elevators, mills, mixers, centrifugal pumps and industrial fans. Their split design facilitates assembly and disassembly without having to completely dismantle the shaft, which reduces downtime during maintenance. In addition, the labyrinth-type sealing protects the bearing against the entry of dust, water and particles, extending its service life in contaminated environments.

To select an SAF split plummer block housing, take into account the shaft diameter, the type of bearing it will house (generally bearings with a tapered bore and adapter sleeve), and the operating conditions: load, speed and environment. Sealing is key: standard labyrinths are suitable for many applications, but in the presence of a lot of dirt or moisture additional seals may be required. During mounting, check the alignment of the housing with the shaft and ensure uniform tightening of the connecting bolts. Lubrication must be suitable for the bearing and the service conditions. Careful mounting prevents premature failures.

As for equivalents and interchangeability, SKF SAF housings can be replaced by products from other manufacturers that follow the same dimensional standard. However, it is essential to verify the critical dimensions and the type of bearing they house, since small differences can affect operation. Not all brands use the same nomenclature, so it is advisable to compare actual dimensions and load capacities. If you need to replace an existing housing, the safest approach is to identify the bearing and the shaft and housing dimensions.

If you have the part number of your SAF housing or the shaft and bearing dimensions, send it to us by WhatsApp at MR Accesorios Industriales. With that data we can advise you and quote the housing you need. We work with a wide variety of brands and help you find the right solution for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.