Product page
Y-bearing (insert bearing) SKF PER.FHS205-16
- Manufacturer Part Number
- PER.FHS205-16
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PER.FHS205-16 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.FHS205-16 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF PER.FHS Y-bearing is an insert with set screw locking, designed to be mounted in split plummer block housings or pillow blocks. It is used in equipment where alignment is not perfect and a unit that absorbs slight misalignment is needed. Its sealed construction makes it suitable for environments with dust or moderate humidity. MR Accesorios Industriales carries this line so you can replace Y-bearings in your equipment with a reliable reference.
The PER.FHS designation identifies an SKF Y-bearing with screw locking. The letters PER correspond to the series, while FHS indicates specific sealing and locking characteristics. The numeric suffix, as in PER.FHS205-16, indicates the bore diameter and mounting variants. In this case, 205-16 refers to a 1 inch bore. To choose the correct replacement, always compare the complete part number with that of the original bearing.
This type of bearing is used in conveyors, belts, elevators, mixers and process equipment. Industries such as food, chemical and logistics use them for their ease of assembly and disassembly. In Argentina, they are commonly found in animal feed plants, packing and material handling. Their sealed design allows them to work in environments with dust or splashes, provided the operating conditions indicated by the manufacturer are respected.
To select the right Y-bearing, take into account the shaft diameter, the type of load and the environmental conditions. Set screw locking requires the shaft to be ground and with the correct tolerance to prevent slipping. The seal must be chosen according to the level of contamination: for very dirty environments, an additional seal is advisable. Lifetime lubrication is common in these bearings, but in severe applications it may require relubrication. Check the housing alignment to maximize service life.
Y-bearings are interchangeable between brands if the main dimensions, locking type and sealing match. However, not all suffixes mean the same thing for each manufacturer. Therefore, when looking for equivalents, it is essential to compare the bore dimensions, outer diameter and width, as well as the locking method. SKF, as a brand that MR carries, offers a reliable reference, but always verify that the replacement meets the requirements of your equipment.
If you need to replace a PER.FHS Y-bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we help you identify the correct reference and send you a quote. We work with in-house manufacturing so you can find the part your equipment needs.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I identify the Y-bearing I need?
- Write down the complete part number engraved on the original bearing, including letters and numbers. If it is not legible, measure the shaft diameter, outer diameter and width. With that data and a photo, we can help you identify the equivalent reference.
- What does the PER.FHS series mean?
- PER.FHS is an SKF designation for Y-bearings with screw locking and a specific seal. The number that follows indicates the bore size and mounting variants. It is not a universal code: each manufacturer uses its own nomenclature.
- Is this bearing suitable for dusty environments?
- Yes, its sealed design offers protection against dust and moderate splashes. For highly contaminated environments, consider an additional seal or ask us about alternatives with greater protection. The choice depends on the specific conditions of your equipment.