Y-bearing (insert bearing) SKF PER.G206HPPB4

SKF PER.G206HPPB4 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.G206HPPB4 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.G HPPB series Y-bearing is an insert with a spherical outer ring and quick fixing system, intended for split plummer block housings and bearing units. It is used in equipment where mounting and dismounting without special tools is required, with good tolerance to slight misalignments. MR Accesorios Industriales supplies this line as an official brand, with technical advice to choose the correct variant according to the shaft and housing.

The designation of this series combines letters and numbers that should be read in order. PER.G identifies the family of inserts with spherical outer ring and set screw fixing; the G followed by a number indicates the shaft diameter in inches or millimeters depending on the variant. The HPPB block indicates the type of sealing and the insert configuration, while the final number (as in PER.G206HPPB4 or PER.G207HPPB2) distinguishes versions within the same size. Not all combinations exist for every diameter: that is why it is advisable to verify the complete code before ordering.

These bearings are used in conveyors, belts, elevators, mixers, fans and agricultural machinery. In Argentina they appear frequently in food plants, packing houses, feedlots and metalworking workshops, where dust, moisture or washing demand reliable sealing. Being inserts, they are mounted in split plummer block housings or complete units, which simplifies replacement in equipment with long or hard-to-access shafts. They are also chosen in applications where the shaft is not perfectly aligned with the housing.

To select correctly, first look at the shaft diameter and the housing type. The HPPB sealing is designed to retain grease and stop the ingress of contaminants; if the environment has a lot of water or fine dust, it is advisable to check the condition of the lip and the clearance. Set screw fixing requires tightening on the inner ring with the correct key and verifying that the shaft has no burrs. Lubricate with compatible grease and check the alignment of the housing: a slight misalignment is absorbed by the spherical ring, but forced mounting shortens service life.

As for equivalences, inserts with spherical ring and set screw fixing are available from several brands with their own nomenclatures. There is no universal table: the same shaft diameter may vary in width, sealing or fixing system. If you need to replace a Y-bearing, send the complete code and the shaft dimensions; at MR Accesorios Industriales we guide you on the alternative that best fits, without inventing codes or forcing interchangeabilities that are not verified.

If you have the code PER.G206HPPB4, PER.G207HPPB2 or any other variant of the series, send it by WhatsApp along with a photo of the housing and the shaft dimensions. At MR Accesorios Industriales we quote SKF bearings and help you confirm the correct version before buying.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.