Product page
Y-bearing (insert bearing) SKF PER.FHR6005-XD-D
- Manufacturer Part Number
- PER.FHR6005-XD-D
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PER.FHR6005-XD-D is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.FHR6005-XD-D via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF PER.FHR-XD-D Y-bearing is an insert with set screw locking, designed to be mounted in split or solid housings. It is used in equipment where alignment is not perfect and slight misalignments need to be absorbed. Its sealed design makes it suitable for environments with dust or moderate humidity. It is a common replacement part in industrial maintenance.
The PER.FHR-XD-D designation is read in parts. PER indicates the insert series, with its own construction features. FHR indicates the type of locking and sealing. XD refers to the outer ring design and D to sealing or tolerance variants. The example PER.FHR6005-XD-D combines the series with the code 6005, which refers to the size of the base bearing. With that complete code you can identify the part without ambiguity.
These Y-bearings are used in conveyors, belts, elevators, mixers and process equipment. In Argentina they appear in food plants, cement plants, paper mills and cold storage facilities, where washing and dust demand good sealing. Also in agricultural machinery and packaging lines. As inserts, they are mounted in housings that MR manufactures or supplies, which simplifies replacement.
To choose correctly, check the shaft diameter and the type of locking. Set screw locking requires the shaft to have adequate hardness and the screws to be tightened with a torque wrench. Check the sealing: if there is water or fine dust, a reinforced seal is advisable. Lubrication must be the one indicated by the manufacturer and the assembly must be aligned to avoid parasitic axial loads.
Regarding equivalences, Y-bearings are interchangeable between brands if dimensions, locking and sealing match. The shaft diameter alone is not enough: the total width, the position of the screws and the type of sealing must be compared. SKF is an official brand that MR supplies, and on the site you will find equivalent alternatives. It is always advisable to validate interchangeability with the complete code.
If you have the code PER.FHR6005-XD-D or that of your equipment, send it by WhatsApp to MR Accesorios Industriales. With that data we will quote the correct part and advise you on the assembly. More than 80 years of experience in bearings and power transmission back us.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the PER.FHR-XD-D designation mean?
- The letters indicate series, type of locking, outer ring design and sealing variant. The number that follows, such as 6005 in the example, identifies the size of the base bearing. With the complete code the exact part can be requested.
- How is this Y-bearing mounted?
- It is inserted into the housing and fixed to the shaft with the set screws, tightening them to the recommended torque. It is important that the shaft is clean and free of burrs, and that alignment is correct to avoid unnecessary stress.
- Is it suitable for environments with water or dust?
- Yes, the XD sealing is designed for those conditions. Still, if washing is frequent or there is abrasive dust, it is advisable to verify the type of sealing and lubrication. Send us the working conditions and we will guide you.