Y-bearing (insert bearing) SKF PER.99R8-DV2

SKF PER.99R8-DV2 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.99R8-DV2 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.99R8-DV2 Y-bearing is an insert with extended inner ring and set screw locking system, designed to be mounted on shafts and housed in split or pillow block housings. It is used in equipment where a simple, robust and easy-to-mount bearing unit is needed. MR Accesorios Industriales carries this reference as part of its SKF bearing line, with technical advice to select the right variant for the application.

The designation PER.99R8-DV2 is read in parts: the prefix PER identifies the series of inserts with extended inner ring and screw locking; the number 99R8 defines the size and main dimensions; the suffix DV2 indicates the type of sealing, in this case a double-lip seal with additional protection against contaminants. This combination is typical of Y-bearings for applications with dust or moderate humidity. Knowing the nomenclature allows you to order the correct replacement without ambiguity.

This type of Y-bearing is used in a wide variety of industries in Argentina: from conveyors and elevators in food plants, to agricultural machinery, bottling equipment, ventilation systems and belt drives. Its self-aligning design and ability to be mounted in split housings make it ideal for shafts requiring flexible alignment. It is also found in low and medium speed equipment where ease of maintenance is a priority.

To correctly select a Y-bearing such as the PER.99R8-DV2, take into account the shaft diameter, the type of load (radial, axial or combined), environmental conditions and the locking method. The PER series is mounted on shafts with h6 tolerance or similar and is locked by set screws on the extended inner ring. Verify that the DV2 sealing is compatible with the environment: if there are fine abrasives or frequent washdowns, additional protection may be required. Lifetime lubrication is common in these inserts, but in severe applications relubrication may be necessary.

Regarding equivalences and interchangeability, Y-bearings are manufactured under international standards that allow replacing one brand with another if critical dimensions such as bore diameter, outer diameter, width and locking type match. However, not all suffixes mean the same thing between manufacturers: a DV2 seal from SKF may have an equivalent with a different designation in other brands. Therefore, it is always advisable to verify dimensions and seal type before substituting. MR Accesorios Industriales can advise you on the right equivalent.

If you need a quote for the SKF PER.99R8-DV2 Y-bearing or any other reference in the SKF line, send the code via WhatsApp to MR Accesorios Industriales. Our technical team will respond with the alternatives that best fit your equipment. We have more than 80 years of experience in the field, offering bearings, housings and power transmission for Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.