Product page
Y-bearing (insert bearing) SKF BLRD 367580 C-2RS
- Manufacturer Part Number
- BLRD 367580 C-2RS
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF BLRD 367580 C-2RS is a y-bearing (insert bearing) reference, within Bearings. Request a quote for BLRD 367580 C-2RS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF BLRD C-2RS series Y-bearing is an insert with an extended inner ring and double sealing, designed to be mounted in split housings or take-up units. It is used in equipment where the shaft rotates and needs alignment and protection against contaminants. MR Accesorios Industriales sells this line as an official brand, with advice to choose the correct size for your application.
The BLRD C-2RS designation is read in parts: BLRD identifies the insert series, C indicates a construction variant within the family and 2RS indicates double rubber sealing on both sides. A specific example is BLRD 367580 C-2RS, where the long number corresponds to an internal manufacturer code. To order the replacement, send the complete part number shown on the bearing or on the equipment plate.
These inserts appear in belt conveyors, bucket elevators, mixers, screens and packaging lines. In agriculture, they are seen in seeders and harvesters; in the food industry, in washable equipment. The combination of double sealing and extended ring makes them suitable for environments with dust, humidity or frequent washdowns, provided the housing is well secured and aligned.
To select, verify the shaft diameter and the type of housing where it will be mounted. The 2RS sealing requires adequate lubrication: good quality grease and replacement according to the duty cycle. When mounting, avoid striking the outer ring; apply force on the inner ring. Alignment between housings is key so the insert works without lateral loads that shorten its service life.
As for equivalences, each manufacturer has its own nomenclature for Y-inserts. There is no universal table that converts part numbers between brands, but by measuring shaft diameter, total width and type of locking, the replacement can be found. At MR Accesorios Industriales we help you compare alternatives if you send us the dimensions or the original part number.
If you need this SKF Y-bearing or its equivalent, send us the part number BLRD 367580 C-2RS or your shaft dimensions by WhatsApp. We'll quote it promptly and advise you so the replacement is the correct one.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the 2RS abbreviation mean on this bearing?
- 2RS indicates that the bearing has rubber seals on both sides. These seals protect against dust, water and contaminants, and retain lubrication. They are suitable for dirty environments or frequent washdowns, although they do not replace good maintenance practice.
- How do I choose the replacement if I don't have the original part number?
- Measure the shaft diameter, the total width of the insert and the type of shaft locking. With that data, we can look for the equivalent in the BLRD C-2RS series or another compatible one. You can also send us a photo of the bearing and the housing by WhatsApp.
- Does this bearing come with a housing or is it sold alone?
- This part number corresponds only to the insert, without housing. If you need the assembled unit, ask us about the split housing or take-up unit suitable for this bearing. We can quote both parts together to ensure compatibility.