Y-bearing (insert bearing) SKF YAR 206-102-2RFG/VL208

SKF YAR 206-102-2RFG/VL208 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YAR 206-102-2RFG/VL208 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing is an insert with an extended inner ring and set screw locking, designed to be mounted in split or pillow block housings. The SKF YAR RFG/VL series stands out for its double-lip seal and its lubrication groove, which makes it suitable for equipment with rotating shafts where the goal is to protect the lubricant and keep the bearing in place without additional machining.

The designation of this series combines several keys. YAR identifies a Y-bearing with extended inner ring and set screws; RFG indicates a double-lip seal with additional protection; VL indicates the presence of a lubrication groove in the outer ring. The number that follows —as in YAR 206-102-2RFG/VL208— defines the shaft diameter and the sealing variant. Knowing these parts allows you to order the correct replacement without ambiguity.

These bearings are used in belt conveyors, bucket elevators, mixers, fans and agricultural machinery, where the shaft rotates and the housing is fixed to the structure. In Argentina they are common in food plants, cement plants and material handling equipment. Their sealed design makes them suitable for environments with dust or moderate humidity, provided alignment is respected and lubrication is carried out as appropriate.

To select correctly, check the shaft diameter and the housing type. The double-lip seal protects against contaminants; the lubrication groove makes it easy to relubricate without disassembly. During mounting, tighten the set screws onto the shaft with the appropriate wrench and check that the inner ring is properly seated. Correct lubrication and careful alignment extend the bearing's service life.

If you need to replace a Y-bearing from another brand, interchangeability is defined by the main dimensions and the locking type. Matching the shaft diameter is not enough: you must compare the overall width, the position of the screws and the sealing. In general, Y-bearings from different brands with the same basic designation are interchangeable, but it is advisable to verify each case with the technical data sheet.

At MR Accesorios Industriales we carry the SKF brand as part of our bearing line. If you have the part number of the YAR RFG/VL bearing you need, send it by WhatsApp and we will provide a quote. We can also advise you if you are unsure between a sealed variant and one with a lubrication groove for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.